X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d4ek.h;h=411ed29ab3cbbfd9a144c4c5a8d187d38dfb319c;hb=10f6e4dc3a16c21f235416f975ecf2070ceb351f;hp=ab858cecfab292499b5f595a2243cf39882ecd76;hpb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index ab858ce..411ed29 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the SAMA5D4EK board.
  *
  * Copyright (C) 2014 Atmel
  *		      Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -13,88 +12,21 @@
 #include "at91-sama5_common.h"
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR		0x218000
-#else
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-#endif
-
-#define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
-
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_SPEED		30000000
-#endif
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_BASE		0x80000000
 /* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-/* PMECC & PMERRLOC */
-#define CONFIG_ATMEL_NAND_HWECC
-#define CONFIG_ATMEL_NAND_HW_PMECC
-#endif
-
-/* LCD */
-#define LCD_BPP				LCD_COLOR16
-#define LCD_OUTPUT_BPP                  18
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
-#ifdef CONFIG_SYS_USE_SERIALFLASH
-/* override the bootcmd, bootargs and other configuration for spi flash env*/
-#elif CONFIG_SYS_USE_NANDFLASH
-/* override the bootcmd, bootargs and other configuration for nandflash env*/
-#elif CONFIG_SYS_USE_MMC
-/* override the bootcmd, bootargs and other configuration for sd/mmc env */
 #endif
 
 /* SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE		0x200000
-#define CONFIG_SPL_MAX_SIZE		0x18000
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
-#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/armv7/u-boot-spl.lds
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-
-#elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_PMECC_CAP		8
-#define CONFIG_PMECC_SECTOR_SIZE	512
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE	0x1000
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_OOBSIZE		224
-#define CONFIG_SYS_NAND_BLOCK_SIZE	0x40000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
-#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
-
-#elif CONFIG_SYS_USE_SERIALFLASH
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
-
-#endif
 #endif