X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d4ek.h;h=354e5104c52fc6028199baee68fb6cbdd3204d47;hb=10f6e4dc3a16c21f235416f975ecf2070ceb351f;hp=546d7a3a9f38db9ed5c36ed457a32a776f83dec9;hpb=1d2f74690cace803844bce198a6d5fa1b6cd11f9;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 546d7a3..411ed29 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -1,206 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Configuration settings for the SAMA5D4EK board. * * Copyright (C) 2014 Atmel * Bo Shen - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H -/* No NOR flash, this definition should put before common header */ -#define CONFIG_SYS_NO_FLASH - #include "at91-sama5_common.h" -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_USART3 -#define CONFIG_USART_ID ATMEL_ID_USART3 - /* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x210000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -/* SerialFlash */ -#define CONFIG_CMD_SF - -#ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI -#define CONFIG_ATMEL_SPI0 -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_ATMEL -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#endif - /* NAND flash */ -#define CONFIG_CMD_NAND - #ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_BASE 0x80000000 /* our ALE is AD21 */ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ONFI_DETECTION -/* PMECC & PMERRLOC */ -#define CONFIG_ATMEL_NAND_HWECC -#define CONFIG_ATMEL_NAND_HW_PMECC -#endif - -/* MMC */ -#define CONFIG_CMD_MMC - -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 -#endif - -/* USB */ -#define CONFIG_CMD_USB - -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ATMEL -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 -#define CONFIG_USB_STORAGE -#endif - -/* USB device */ -#define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_ATMEL_USBA -#define CONFIG_USB_ETHER -#define CONFIG_USB_ETH_RNDIS -#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK" - -#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* Ethernet Hardware */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_MACB_SEARCH_PHY - -/* LCD */ -#define CONFIG_LCD -#define LCD_BPP LCD_COLOR16 -#define LCD_OUTPUT_BPP 18 -#define CONFIG_LCD_LOGO -#define CONFIG_LCD_INFO -#define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_SYS_WHITE_ON_BLACK -#define CONFIG_ATMEL_HLCD -#define CONFIG_ATMEL_LCD_RGB565 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -#ifdef CONFIG_SYS_USE_SERIALFLASH -/* bootstrap + u-boot + env + linux in serial flash */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS -#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#define CONFIG_ENV_OFFSET 0x10000 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x1000 -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0xa0000 0x60000; " \ - "sf read 0x22000000 0x100000 0x300000; " \ - "bootz 0x22000000 - 0x21000000" -#elif CONFIG_SYS_USE_NANDFLASH -/* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" -#elif CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_FAT -#define CONFIG_FAT_WRITE -#define FAT_ENV_INTERFACE "mmc" -/* - * We don't specify the part number, if device 0 has partition table, it means - * the first partition; it no partition table, then take whole device as a - * FAT file system. - */ -#define FAT_ENV_DEVICE_AND_PART "0" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 sama5d4ek.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" #endif /* SPL */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x200000 -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT - -#elif CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_BASE -#define CONFIG_PMECC_CAP 8 -#define CONFIG_PMECC_SECTOR_SIZE 512 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000 -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_OOBSIZE 224 -#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 -#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER - -#elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 - -#endif #endif