X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d4ek.h;h=00ed4009faa50618e6b7eccfde51032a87654f0f;hb=ef26d6039a14c03c516c09a7835b491e671a4b0b;hp=ce96a7c7e77fc90b908eb2689cf06e75415ada6b;hpb=c1924d85af4a07dc70aef1ef95c48b54a136733f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index ce96a7c..00ed400 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -35,7 +35,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
 
 /* SerialFlash */
-#define CONFIG_CMD_SF
 
 #ifdef CONFIG_CMD_SF
 #define CONFIG_ATMEL_SPI
@@ -63,7 +62,6 @@
 #endif
 
 /* MMC */
-#define CONFIG_CMD_MMC
 
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_MMC
@@ -73,25 +71,19 @@
 #endif
 
 /* USB */
-#define CONFIG_CMD_USB
 
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-#define CONFIG_USB_STORAGE
 #endif
 
 /* USB device */
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_ATMEL_USBA
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS
 #define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D4EK"
 
 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -102,7 +94,6 @@
 #define CONFIG_MACB_SEARCH_PHY
 
 /* LCD */
-#define CONFIG_LCD
 #define LCD_BPP				LCD_COLOR16
 #define LCD_OUTPUT_BPP                  18
 #define CONFIG_LCD_LOGO
@@ -111,7 +102,6 @@
 #define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 #ifdef CONFIG_SYS_USE_SERIALFLASH
 /* override the bootcmd, bootargs and other configuration for spi flash env*/
@@ -130,26 +120,17 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/armv7/u-boot-spl.lds
-#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
 
 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_PMECC_CAP		8
@@ -164,8 +145,6 @@
 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
 #elif CONFIG_SYS_USE_SERIALFLASH
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000