X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d4_xplained.h;h=80809df638a5d8ad891a240cf1de34c8f197a75c;hb=f1c0b7cd4be2081ae3711cec2c4cc2910a5817e1;hp=fb1e74019db8fce7f862907a0aad7edaf611a44e;hpb=5512f5ccf1dc5cec068f8efa1d8ce81f51a988d3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index fb1e740..80809df 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the SAMA5D4 Xplained ultra board.
  *
  * Copyright (C) 2014 Atmel
  *		      Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -12,10 +11,7 @@
 
 #include "at91-sama5_common.h"
 
-#define CONFIG_MISC_INIT_R
-
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
 
@@ -28,13 +24,8 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
 
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_SPEED		30000000
-#endif
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x80000000
 /* our ALE is AD21 */
@@ -42,13 +33,9 @@
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-/* PMECC & PMERRLOC */
-#define CONFIG_ATMEL_NAND_HWECC
-#define CONFIG_ATMEL_NAND_HW_PMECC
 #endif
 
 /* SPL */
-#define CONFIG_SPL_TEXT_BASE		0x200000
 #define CONFIG_SPL_MAX_SIZE		0x18000
 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
@@ -58,19 +45,8 @@
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-
-#elif CONFIG_SYS_USE_NANDFLASH
-#elif CONFIG_SPI_BOOT
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
-
-#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
 #endif
-#define CONFIG_PMECC_CAP		8
-#define CONFIG_PMECC_SECTOR_SIZE	512
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_SIZE	0x1000
@@ -78,6 +54,5 @@
 #define CONFIG_SYS_NAND_OOBSIZE		224
 #define CONFIG_SYS_NAND_BLOCK_SIZE	0x40000
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
-#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
 #endif