X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d3xek.h;h=dc89148a0450529e34d7432ec3152f77e1a41e9e;hb=cd6a45a41fb2c19884ac87afade87b4d53601929;hp=51db1359401085888ad533ef14a05503c7e81e5e;hpb=c8a0126f881007fe2aef1db854a78eac25c174fa;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 51db135..dc89148 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the SAMA5D3xEK board.
  *
@@ -6,8 +7,6 @@
  * based on at91sam9m10g45ek.h by:
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -31,90 +30,33 @@
 
 /* NOR flash */
 #ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_PROTECTION
 #define CONFIG_SYS_FLASH_BASE		0x10000000
 #define CONFIG_SYS_MAX_FLASH_SECT	131
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
 #endif
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR		0x318000
-#else
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-#endif
-
 /* SerialFlash */
 
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_SPEED		30000000
-#endif
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x60000000
 /* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ONFI_DETECTION
 #endif
-/* PMECC & PMERRLOC */
-#define CONFIG_ATMEL_NAND_HWECC
-#define CONFIG_ATMEL_NAND_HW_PMECC
-#define CONFIG_PMECC_CAP		4
-#define CONFIG_PMECC_SECTOR_SIZE	512
 
 /* USB */
-
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"sama5d3"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
 #endif
 
-#define CONFIG_SYS_LOAD_ADDR			0x22000000 /* load address */
-
 /* SPL */
-#define CONFIG_SPL_TEXT_BASE		0x300000
-#define CONFIG_SPL_MAX_SIZE		0x18000
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
-
-#elif CONFIG_SPI_BOOT
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
-
-#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
-#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
-
 #endif