X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d3xek.h;h=05e96f9fc4039fa7e3033aea2f58ef131e919986;hb=43ade93bdb0c8bd57382be810a05b3793749ce85;hp=bd5f4eef084318fe358413bf3a7a1bce54d28594;hpb=f1993ca066100fcaba7d49fecae0ef604e5807e2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index bd5f4ee..05e96f9 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -19,7 +19,6 @@
  */
 #include "at91-sama5_common.h"
 
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
 /* serial console */
@@ -39,7 +38,6 @@
 #define ATMEL_PMC_UHP			AT91SAM926x_PMC_UHP
 
 /* LCD */
-#define CONFIG_LCD
 #define LCD_BPP				LCD_COLOR16
 #define LCD_OUTPUT_BPP                  24
 #define CONFIG_LCD_LOGO
@@ -48,7 +46,6 @@
 #define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* board specific (not enough SRAM) */
 #define CONFIG_SAMA5D3_LCD_BASE		0x23E00000
@@ -76,7 +73,6 @@
 #endif
 
 /* SerialFlash */
-#define CONFIG_CMD_SF
 
 #ifdef CONFIG_CMD_SF
 #define CONFIG_ATMEL_SPI
@@ -109,23 +105,18 @@
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_MACB_SEARCH_PHY
 #define CONFIG_RGMII
-#define CONFIG_CMD_MII
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
 #define CONFIG_PHY_MICREL_KSZ9021
 
 /* MMC */
-#define CONFIG_CMD_MMC
 
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define ATMEL_BASE_MMCI			ATMEL_BASE_MCI0
 #endif
 
 /* USB */
-#define CONFIG_CMD_USB
 
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
@@ -135,20 +126,14 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"sama5d3"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
-#define CONFIG_DOS_PARTITION
-#define CONFIG_USB_STORAGE
 #endif
 
 /* USB device */
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_ATMEL_USBA
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS
 #define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D3xEK"
 
 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_CMD_FAT
 #define CONFIG_FAT_WRITE
 #endif
 
@@ -173,26 +158,15 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/armv7/u-boot-spl.lds
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
 
 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
@@ -205,8 +179,6 @@
 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
 #elif CONFIG_SYS_USE_SERIALFLASH
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000