X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d3xek.h;h=05e96f9fc4039fa7e3033aea2f58ef131e919986;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=9497bea9467480f0bcf915499ba43ddbb235bd70;hpb=1254ff97abb7606ccd0d7bdcd9f22581c50fe535;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 9497bea..05e96f9 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -19,6 +19,8 @@
  */
 #include "at91-sama5_common.h"
 
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
 /* serial console */
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
@@ -36,7 +38,6 @@
 #define ATMEL_PMC_UHP			AT91SAM926x_PMC_UHP
 
 /* LCD */
-#define CONFIG_LCD
 #define LCD_BPP				LCD_COLOR16
 #define LCD_OUTPUT_BPP                  24
 #define CONFIG_LCD_LOGO
@@ -45,7 +46,6 @@
 #define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* board specific (not enough SRAM) */
 #define CONFIG_SAMA5D3_LCD_BASE		0x23E00000
@@ -73,11 +73,9 @@
 #endif
 
 /* SerialFlash */
-#define CONFIG_CMD_SF
 
 #ifdef CONFIG_CMD_SF
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #endif
 
@@ -107,23 +105,18 @@
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_MACB_SEARCH_PHY
 #define CONFIG_RGMII
-#define CONFIG_CMD_MII
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
 #define CONFIG_PHY_MICREL_KSZ9021
 
 /* MMC */
-#define CONFIG_CMD_MMC
 
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define ATMEL_BASE_MMCI			ATMEL_BASE_MCI0
 #endif
 
 /* USB */
-#define CONFIG_CMD_USB
 
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
@@ -133,53 +126,25 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"sama5d3"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
-#define CONFIG_DOS_PARTITION
-#define CONFIG_USB_STORAGE
 #endif
 
 /* USB device */
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_ATMEL_USBA
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS
 #define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D3xEK"
 
 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_CMD_FAT
 #define CONFIG_FAT_WRITE
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000 /* load address */
 
 #ifdef CONFIG_SYS_USE_SERIALFLASH
-/* bootstrap + u-boot + env + linux in serial flash */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET       0x5000
-#define CONFIG_ENV_SIZE         0x3000
-#define CONFIG_ENV_SECT_SIZE    0x1000
-#define CONFIG_BOOTCOMMAND      "sf probe 0; " \
-				"sf read 0x22000000 0x42000 0x300000; " \
-				"bootm 0x22000000"
+/* override the bootcmd, bootargs and other configuration for spi flash env*/
 #elif CONFIG_SYS_USE_NANDFLASH
-/* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		0xc0000
-#define CONFIG_ENV_OFFSET_REDUND	0x100000
-#define CONFIG_ENV_SIZE			0x20000
-#define CONFIG_BOOTCOMMAND	"nand read 0x21000000 0x180000 0x80000;" \
-				"nand read 0x22000000 0x200000 0x600000;" \
-				"bootm 0x22000000 - 0x21000000"
+/* override the bootcmd, bootargs and other configuration nandflash env */
 #elif CONFIG_SYS_USE_MMC
-/* bootstrap + u-boot + env in sd card */
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE	"mmc"
-#define FAT_ENV_FILE		"uboot.env"
-#define FAT_ENV_DEVICE_AND_PART	"0"
-#define CONFIG_ENV_SIZE		0x4000
-#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 dtb; " \
-				"fatload mmc 0:1 0x22000000 uImage; " \
-				"bootm 0x22000000 - 0x21000000"
+/* override the bootcmd, bootargs and other configuration for sd/mmc env */
 #else
 #define CONFIG_ENV_IS_NOWHERE
 #endif
@@ -193,26 +158,15 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/armv7/u-boot-spl.lds
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
 
 #elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
@@ -225,10 +179,8 @@
 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
 #elif CONFIG_SYS_USE_SERIALFLASH
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8400
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
 
 #endif