X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d3_xplained.h;h=4b13a101170faa812cb86e201e2cdcfa56c12a32;hb=78f67f11a9920ef988cbff5341616695c3e87ebd;hp=7f774461b586d2f808b2e28943633e5faf9bc369;hpb=0c4a63438cf78b3c9a971347435ce34edbe1658d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 7f77446..4b13a10 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -24,63 +24,23 @@
 #define ATMEL_PMC_UHP			(1 <<  6)
 
 /* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE           0x20000000
-#define CONFIG_SYS_SDRAM_SIZE		0x10000000
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR		0x318000
-#else
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-#endif
+#define CFG_SYS_SDRAM_BASE           0x20000000
+#define CFG_SYS_SDRAM_SIZE		0x10000000
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x60000000
+#define CFG_SYS_NAND_BASE		0x60000000
 /* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
+#define CFG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00600000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"SAMA5D3 Xplained"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CFG_SYS_NAND_MASK_CLE	(1 << 22)
 #endif
 
-#define CONFIG_SYS_LOAD_ADDR			0x22000000 /* load address */
-
 /* SPL */
-#define CONFIG_SPL_MAX_SIZE		0x18000
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
 /* size of u-boot.bin to load */
-#define CONFIG_SYS_MONITOR_LEN		(2 * SZ_512K)
-
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
-#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_BASE
-#endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+/* Falcon boot support on raw MMC */
+/* U-Boot proper stored by default at 0x200 (256 KiB) */
 
 #endif