X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d2_xplained.h;h=f044f0e6def4880151560ba2778b4785ee7bea88;hb=cb33bda44f4bbf6fb58adf41dced313ca38da6fc;hp=563c045dc951831e4f489dff0058a56c01fbb873;hpb=12f05678e157ef4472b4e3611bb7ae9751487ff0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 563c045..f044f0e 100644
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -10,15 +10,9 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* No NOR flash, this definition should put before common header */
-#define CONFIG_SYS_NO_FLASH
-
 #include "at91-sama5_common.h"
 
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_UART1
-#define CONFIG_USART_ID			ATMEL_ID_UART1
+#define CONFIG_MISC_INIT_R
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
@@ -26,22 +20,16 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR		0x210000
+#define CONFIG_SYS_INIT_SP_ADDR		0x218000
 #else
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
 
-#undef CONFIG_AT91_GPIO
-#define CONFIG_ATMEL_PIO4
-
 /* SerialFlash */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
-#define CONFIG_ATMEL_SPI0
-#define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_SF_DEFAULT_BUS		0
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED		30000000
@@ -50,43 +38,11 @@
 /* NAND flash */
 #undef CONFIG_CMD_NAND
 
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_SDHCI
-#define CONFIG_ATMEL_SDHCI
-#define CONFIG_ATMEL_SDHCI0
-#define CONFIG_ATMEL_SDHCI1
-#define CONFIG_SUPPORT_EMMC_BOOT
-#endif
-
-/* USB */
-
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-#endif
-
-/* USB device */
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D2 XPlained"
-
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
-/* Ethernet Hardware */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_MACB_SEARCH_PHY
+/* I2C */
+#define AT24MAC_ADDR		0x5c
+#define AT24MAC_REG		0x9a
 
 /* LCD */
-/* #define CONFIG_LCD */
 
 #ifdef CONFIG_LCD
 #define LCD_BPP				LCD_COLOR16
@@ -94,10 +50,8 @@
 #define CONFIG_LCD_LOGO
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #endif
 
 #ifdef CONFIG_SYS_USE_MMC
@@ -119,35 +73,23 @@
 /* SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x200000
-#define CONFIG_SPL_MAX_SIZE		0x10000
+#define CONFIG_SPL_MAX_SIZE		0x18000
 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/armv7/u-boot-spl.lds
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
 
 #elif CONFIG_SYS_USE_SERIALFLASH
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
 
 #endif