X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsama5d27_som1_ek.h;h=0eecb561508ede715696f319841de349e9f36868;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=fdf19ad680b41441c7ee942e34c45c6ff8d4eed9;hpb=2dc5b553b9bcd701bd7abd60f99f407cb0c37762;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h
index fdf19ad..0eecb56 100644
--- a/include/configs/sama5d27_som1_ek.h
+++ b/include/configs/sama5d27_som1_ek.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration file for the SAMA5D27 SOM1 EK Board.
  *
  * Copyright (C) 2017 Microchip Corporation
  *		      Wenyou Yang <wenyou.yang@microchip.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -12,81 +11,11 @@
 
 #include "at91-sama5_common.h"
 
-#undef CONFIG_SYS_TEXT_BASE
 #undef CONFIG_SYS_AT91_MAIN_CLOCK
-#define CONFIG_SYS_TEXT_BASE		0x23f00000
 #define CONFIG_SYS_AT91_MAIN_CLOCK      24000000 /* from 24 MHz crystal */
 
-#define CONFIG_MISC_INIT_R
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE		0x20000000
-#define CONFIG_SYS_SDRAM_SIZE		0x8000000
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR		0x218000
-#else
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-#endif
-
-#define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
-
-/* NAND flash */
-#undef CONFIG_CMD_NAND
-
-/* SPI flash */
-#define CONFIG_SF_DEFAULT_SPEED		66000000
-
-#undef CONFIG_BOOTCOMMAND
-#ifdef CONFIG_SD_BOOT
-/* u-boot env in sd/mmc card */
-#define FAT_ENV_INTERFACE	"mmc"
-#define FAT_ENV_DEVICE_AND_PART	"0"
-#define FAT_ENV_FILE		"uboot.env"
-#define CONFIG_ENV_SIZE		0x4000
-/* bootstrap + u-boot + env in sd card */
-#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 at91-sama5d27_som1_ek.dtb; " \
-				"fatload mmc 0:1 0x22000000 zImage; " \
-				"bootz 0x22000000 - 0x21000000"
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS \
-	"console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
-#endif
-
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_ENV_OFFSET		0xb0000
-#define CONFIG_ENV_SIZE			0x10000
-#define CONFIG_ENV_SECT_SIZE		0x10000
-#define CONFIG_BOOTCOMMAND		"sf probe 0; "				\
-					"sf read 0x21000000 0xc0000 0x20000; "	\
-					"sf read 0x22000000 0xe0000 0x400000; "	\
-					"bootz 0x22000000 - 0x21000000"
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS \
-	"console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
-#endif
-
 /* SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE		0x200000
-#define CONFIG_SPL_MAX_SIZE		0x10000
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-#endif
-
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
-#endif
-
 #endif