X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsam9x60ek.h;h=b9b56d9f1a046ac0a86aac0e9e9587aaa0110e3d;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=7d0768fa3476869facfc95bbaa36c877ffa9d9f5;hpb=e2e5eec6ce1c2cb496a2a5e019a175a9fbdbed2a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h
index 7d0768f..b9b56d9 100644
--- a/include/configs/sam9x60ek.h
+++ b/include/configs/sam9x60ek.h
@@ -14,21 +14,9 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK	24000000	/* 24 MHz crystal */
 
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
 #define CONFIG_USART_BASE   ATMEL_BASE_DBGU
 #define CONFIG_USART_ID     0 /* ignored in arm */
 
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
 /*
  * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
  * NB: in this case, USB 1.1 devices won't be recognized.
@@ -38,10 +26,6 @@
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x10000000	/* 256 megs */
 
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \
-	 GENERATED_GBL_DATA_SIZE)
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
@@ -50,29 +34,6 @@
 #define CONFIG_SYS_NAND_MASK_CLE	BIT(22)
 #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
 #define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#endif
-
-#ifdef CONFIG_SD_BOOT
-/* bootstrap + u-boot + env + linux in sd card */
-#define CONFIG_BOOTCOMMAND  \
-			"fatload mmc 0:1 0x21000000 at91-sam9x60ek.dtb;" \
-			"fatload mmc 0:1 0x22000000 zImage;" \
-			"bootz 0x22000000 - 0x21000000"
-
-#elif defined(CONFIG_NAND_BOOT)
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_BOOTCOMMAND	"nand read " \
-				"0x22000000 0x200000 0x600000; " \
-				"nand read 0x21000000 0x180000 0x20000; " \
-				"bootz 0x22000000 - 0x21000000"
-
-#elif defined(CONFIG_QSPI_BOOT)
-/* bootstrap + u-boot + env + linux in SPI NOR flash */
-#define CONFIG_BOOTCOMMAND	"sf probe 0; "					\
-				"sf read 0x21000000 0x180000 0x80000; "		\
-				"sf read 0x22000000 0x200000 0x600000; "	\
-				"bootz 0x22000000 - 0x21000000"
 #endif
 
 #endif