X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsam9x60ek.h;h=27b39ebf41742df6a23ce9c584f22b6f3eae7bde;hb=6786ce1ce14feb4d02854a0c04bc0cce505be46e;hp=7d0768fa3476869facfc95bbaa36c877ffa9d9f5;hpb=e2e5eec6ce1c2cb496a2a5e019a175a9fbdbed2a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h
index 7d0768f..27b39eb 100644
--- a/include/configs/sam9x60ek.h
+++ b/include/configs/sam9x60ek.h
@@ -11,68 +11,28 @@
 #define __CONFIG_H__
 
 /* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK	32768
-#define CONFIG_SYS_AT91_MAIN_CLOCK	24000000	/* 24 MHz crystal */
-
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
+#define CFG_SYS_AT91_SLOW_CLOCK	32768
+#define CFG_SYS_AT91_MAIN_CLOCK	24000000	/* 24 MHz crystal */
 
 #define CONFIG_USART_BASE   ATMEL_BASE_DBGU
 #define CONFIG_USART_ID     0 /* ignored in arm */
 
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
 /*
  * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
  * NB: in this case, USB 1.1 devices won't be recognized.
  */
 
 /* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE		0x20000000
-#define CONFIG_SYS_SDRAM_SIZE		0x10000000	/* 256 megs */
-
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \
-	 GENERATED_GBL_DATA_SIZE)
+#define CFG_SYS_SDRAM_BASE		0x20000000
+#define CFG_SYS_SDRAM_SIZE		0x10000000	/* 256 megs */
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x40000000
-#define CONFIG_SYS_NAND_MASK_ALE	BIT(21)
-#define CONFIG_SYS_NAND_MASK_CLE	BIT(22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#endif
-
-#ifdef CONFIG_SD_BOOT
-/* bootstrap + u-boot + env + linux in sd card */
-#define CONFIG_BOOTCOMMAND  \
-			"fatload mmc 0:1 0x21000000 at91-sam9x60ek.dtb;" \
-			"fatload mmc 0:1 0x22000000 zImage;" \
-			"bootz 0x22000000 - 0x21000000"
-
-#elif defined(CONFIG_NAND_BOOT)
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_BOOTCOMMAND	"nand read " \
-				"0x22000000 0x200000 0x600000; " \
-				"nand read 0x21000000 0x180000 0x20000; " \
-				"bootz 0x22000000 - 0x21000000"
-
-#elif defined(CONFIG_QSPI_BOOT)
-/* bootstrap + u-boot + env + linux in SPI NOR flash */
-#define CONFIG_BOOTCOMMAND	"sf probe 0; "					\
-				"sf read 0x21000000 0x180000 0x80000; "		\
-				"sf read 0x22000000 0x200000 0x600000; "	\
-				"bootz 0x22000000 - 0x21000000"
+#define CFG_SYS_NAND_BASE		0x40000000
+#define CFG_SYS_NAND_MASK_ALE	BIT(21)
+#define CFG_SYS_NAND_MASK_CLE	BIT(22)
+#define CFG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
+#define CFG_SYS_NAND_READY_PIN	AT91_PIN_PD5
 #endif
 
 #endif