X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fsalvator-x.h;h=669602eb60ebc1c218b922627b8e0510b20416c9;hb=a09fea1d28fe3c69a64bee092f5a764274d26ca2;hp=f8bfe96781e57ebdcf22a52153e6b80b193d8987;hpb=a89302cc7908de36e949b02013ac05ce5ef8b354;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h
index f8bfe96..669602e 100644
--- a/include/configs/salvator-x.h
+++ b/include/configs/salvator-x.h
@@ -1,87 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * include/configs/salvator-x.h
  *     This file is Salvator-X board configuration.
  *
  * Copyright (C) 2015 Renesas Electronics Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
  */
 
 #ifndef __SALVATOR_X_H
 #define __SALVATOR_X_H
 
-#undef DEBUG
-
-#define CONFIG_RCAR_BOARD_STRING "Salvator-X"
-
 #include "rcar-gen3-common.h"
 
-/* SCIF */
-#define CONFIG_CONS_SCIF2
-#define CONFIG_CONS_INDEX	2
-#define CONFIG_SH_SCIF_CLK_FREQ        CONFIG_S3D4_CLK_FREQ
-
-/* [A] Hyper Flash */
-/* use to RPC(SPI Multi I/O Bus Controller) */
-
 /* Ethernet RAVB */
-#define CONFIG_NET_MULTI
-#define CONFIG_PHY_MICREL
 #define CONFIG_BITBANGMII
 #define CONFIG_BITBANGMII_MULTI
 
-/* Board Clock */
-/* XTAL_CLK : 33.33MHz */
-#define RCAR_XTAL_CLK		33333333u
-#define CONFIG_SYS_CLK_FREQ	RCAR_XTAL_CLK
-/* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */
-/* CPclk 16.66MHz, S3D2 133.33MHz , S3D4 66.66MHz          */
-#define CONFIG_CP_CLK_FREQ	(CONFIG_SYS_CLK_FREQ / 2)
-#define CONFIG_PLL1_CLK_FREQ	(CONFIG_SYS_CLK_FREQ * 192 / 2)
-#define CONFIG_S3D2_CLK_FREQ	(266666666u/2)
-#define CONFIG_S3D4_CLK_FREQ	(266666666u/4)
-
 /* Generic Timer Definitions (use in assembler source) */
 #define COUNTER_FREQUENCY	0xFE502A	/* 16.66MHz from CPclk */
 
-/* Generic Interrupt Controller Definitions */
-#define CONFIG_GICV2
-#define GICD_BASE	0xF1010000
-#define GICC_BASE	0xF1020000
-
-/* i2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SH
-#define CONFIG_SYS_I2C_SLAVE		0x60
-#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS	1
-#define CONFIG_SYS_I2C_SH_SPEED0	400000
-#define CONFIG_SH_I2C_DATA_HIGH		4
-#define CONFIG_SH_I2C_DATA_LOW		5
-#define CONFIG_SH_I2C_CLOCK		10000000
-
-#define CONFIG_SYS_I2C_POWERIC_ADDR	0x30
-
-/* USB */
-#ifdef CONFIG_R8A7795
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	3
-#else
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-#endif
-
-/* SDHI */
-#define CONFIG_SH_SDHI_FREQ		200000000
-
 /* Environment in eMMC, at the end of 2nd "boot sector" */
-#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
 #define CONFIG_SYS_MMC_ENV_DEV		1
 #define CONFIG_SYS_MMC_ENV_PART		2
 
-/* Module stop status bits */
-/* MFIS, SCIF1 */
-#define CONFIG_SMSTP2_ENA	0x00002040
-/* SCIF2 */
-#define CONFIG_SMSTP3_ENA	0x00000400
-/* INTC-AP, IRQC */
-#define CONFIG_SMSTP4_ENA	0x00000180
-
 #endif /* __SALVATOR_X_H */