X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fs5pc210_universal.h;h=eb046cdac92aa403197c7808b62bf2d3312a07fd;hb=HEAD;hp=4fa8d66a25a7597788164eef2cc96cb6e610b96f;hpb=44ba6b0eccb37dd98becece22632bcc5e5cd2fbe;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 4fa8d66..bf2d04a 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2010 Samsung Electronics * Minkyu Kang * * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board. - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_UNIVERSAL_H @@ -12,66 +11,17 @@ #include -#define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */ - - -#define CONFIG_TIZEN /* TIZEN lib */ - /* Keep L2 Cache Disabled */ -#define CONFIG_SYS_L2CACHE_OFF 1 /* Universal has 2 banks of DRAM */ -#define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define CFG_SYS_SDRAM_BASE 0x40000000 +#define PHYS_SDRAM_1 CFG_SYS_SDRAM_BASE #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -/* select serial console configuration */ -#define CONFIG_SERIAL2 -#define CONFIG_BAUDRATE 115200 - -/* Console configuration */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -#define CONFIG_BOOTARGS "Please use defined boot" -#define CONFIG_BOOTCOMMAND "run mmcboot" -#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ - -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) - -#define CONFIG_SYS_TEXT_BASE 0x44800000 - -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS - /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ -#define MTDIDS_DEFAULT "onenand0=samsung-onenand" - -#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:"\ - "128k(s-boot)"\ - ",896k(bootloader)"\ - ",256k(params)"\ - ",2816k(config)"\ - ",8m(csa)"\ - ",7m(kernel)"\ - ",1m(log)"\ - ",12m(modem)"\ - ",60m(qboot)"\ - ",-(UBI)\0" -#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT +#define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT #define MBRPARTS_DEFAULT "20M(permanent)"\ ",20M(boot)"\ @@ -79,25 +29,7 @@ ",100M(swap)"\ ",-(UMS)\0" -#define CONFIG_ENV_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7" -#define CONFIG_BOOTBLOCK "10" -#define CONFIG_UBIBLOCK "9" - -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV -#define CONFIG_ENV_SIZE 4096 -#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ - -#define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc " -#define CONFIG_ENV_FLASHBOOT CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \ - "${mtdparts}" - -#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}" - -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "updateb=" \ "onenand erase 0x0 0x100000;" \ "onenand write 0x42008000 0x0 0x100000\0" \ @@ -114,18 +46,20 @@ "lpj=lpj=3981312\0" \ "ubifsboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \ - CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \ - CONFIG_ENV_COMMON_BOOT "; run bootk\0" \ + "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \ + "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \ + "${lcdinfo} ${console} ${meminfo}; run bootk\0" \ "tftpboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ - CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \ - CONFIG_ENV_COMMON_BOOT \ + "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \ + "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \ + "${lcdinfo} ${console} ${meminfo}" \ "; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \ "nfsboot=" \ "set bootargs root=/dev/nfs rw " \ "nfsroot=${nfsroot},nolock,tcp " \ "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \ + "${netmask}:generic:usb0:off ${console} ${meminfo}" \ "; run bootk\0" \ "ramfsboot=" \ "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \ @@ -140,13 +74,12 @@ "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \ "verify=n\0" \ "rootfstype=ext4\0" \ - "console=" CONFIG_DEFAULT_CONSOLE \ - "mtdparts=" MTDPARTS_DEFAULT \ + "console=console=ttySAC1,115200n8\0" \ "mbrparts=" MBRPARTS_DEFAULT \ "meminfo=crashkernel=32M@0x50000000\0" \ "nfsroot=/nfsroot/arm\0" \ - "bootblock=" CONFIG_BOOTBLOCK "\0" \ - "ubiblock=" CONFIG_UBIBLOCK" \0" \ + "bootblock=10\0" \ + "ubiblock=9\0" \ "ubi=enabled\0" \ "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \ "mmcdev=0\0" \ @@ -154,67 +87,16 @@ "mmcrootpart=3\0" \ "opts=always_resume=1" -#define CONFIG_USE_ONENAND_BOARD_INIT -#define CONFIG_SAMSUNG_ONENAND -#define CONFIG_SYS_ONENAND_BASE 0x0C000000 - -#include -/* - * I2C Settings - */ -#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7 -#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6 - -#define CONFIG_CMD_I2C - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0 -#define CONFIG_SOFT_I2C_READ_REPEATED_START -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS 7 - -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_MAX8998 - -#define CONFIG_USB_GADGET -#define CONFIG_USB_GADGET_S3C_UDC_OTG -#define CONFIG_USB_GADGET_DUALSPEED - -/* - * SPI Settings - */ -#define CONFIG_SOFT_SPI -#define CONFIG_SOFT_SPI_MODE SPI_MODE_3 -#define CONFIG_SOFT_SPI_GPIO_SCLK EXYNOS4_GPIO_Y31 -#define CONFIG_SOFT_SPI_GPIO_MOSI EXYNOS4_GPIO_Y33 -#define CONFIG_SOFT_SPI_GPIO_MISO EXYNOS4_GPIO_Y30 -#define CONFIG_SOFT_SPI_GPIO_CS EXYNOS4_GPIO_Y43 +#define CFG_SYS_ONENAND_BASE 0x0C000000 -#define SPI_DELAY udelay(1) -#define SPI_SCL(bit) universal_spi_scl(bit) -#define SPI_SDA(bit) universal_spi_sda(bit) -#define SPI_READ universal_spi_read() #ifndef __ASSEMBLY__ void universal_spi_scl(int bit); void universal_spi_sda(int bit); int universal_spi_read(void); #endif -/* Common misc for Samsung */ -#define CONFIG_MISC_COMMON - -#define CONFIG_MISC_INIT_R - -/* Download menu - Samsung common */ -#define CONFIG_LCD_MENU -#define CONFIG_LCD_MENU_BOARD - /* Download menu - definitions for check keys */ #ifndef __ASSEMBLY__ -#include #define KEY_PWR_PMIC_NAME "MAX8998_PMIC" #define KEY_PWR_STATUS_REG MAX8998_REG_STATUS1 @@ -226,19 +108,4 @@ int universal_spi_read(void); #define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21 #endif /* __ASSEMBLY__ */ -/* LCD console */ -#define LCD_BPP LCD_COLOR16 -#define CONFIG_SYS_WHITE_ON_BLACK - -/* - * LCD Settings - */ -#define CONFIG_EXYNOS_FB -#define CONFIG_LCD -#define CONFIG_CMD_BMP -#define CONFIG_BMP_16BPP -#define CONFIG_LD9040 -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) - #endif /* __CONFIG_H */