X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fs5pc210_universal.h;h=ab4fe6b460245e8d8a1c70cb3197fd54e99cf844;hb=a331017c237c7da159a1657984250d656ed1c487;hp=999bdd1676f8bf7815042075e907ba861354634e;hpb=9baa2bce28901321d6f62399b5ebeb3fcb8e8a57;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 999bdd1..ab4fe6b 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -11,10 +11,7 @@ #include -#define CONFIG_TIZEN /* TIZEN lib */ - /* Keep L2 Cache Disabled */ -#define CONFIG_SYS_L2CACHE_OFF 1 /* Universal has 2 banks of DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -22,25 +19,6 @@ #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -/* select serial console configuration */ - -/* Console configuration */ - -#define CONFIG_BOOTCOMMAND "run mmcboot" -#define CONFIG_DEFAULT_CONSOLE "ttySAC1,115200n8" - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ - -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) - /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ #define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT @@ -51,20 +29,6 @@ ",100M(swap)"\ ",-(UMS)\0" -#define CONFIG_ENV_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7" -#define CONFIG_BOOTBLOCK "10" -#define CONFIG_UBIBLOCK "9" - -#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV -#define CONFIG_ENV_SIZE 4096 -#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ - -#define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc " -#define CONFIG_ENV_FLASHBOOT CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \ - "${mtdparts}" - -#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}" - #define CONFIG_EXTRA_ENV_SETTINGS \ "updateb=" \ "onenand erase 0x0 0x100000;" \ @@ -82,18 +46,20 @@ "lpj=lpj=3981312\0" \ "ubifsboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \ - CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \ - CONFIG_ENV_COMMON_BOOT "; run bootk\0" \ + "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \ + "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \ + "${lcdinfo} ${console} ${meminfo}; run bootk\0" \ "tftpboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ - CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \ - CONFIG_ENV_COMMON_BOOT \ + "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \ + "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \ + "${lcdinfo} ${console} ${meminfo}" \ "; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \ "nfsboot=" \ "set bootargs root=/dev/nfs rw " \ "nfsroot=${nfsroot},nolock,tcp " \ "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \ + "${netmask}:generic:usb0:off ${console} ${meminfo}" \ "; run bootk\0" \ "ramfsboot=" \ "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \ @@ -108,13 +74,12 @@ "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \ "verify=n\0" \ "rootfstype=ext4\0" \ - "console=" CONFIG_DEFAULT_CONSOLE "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT \ + "console=console=ttySAC1,115200n8\0" \ "mbrparts=" MBRPARTS_DEFAULT \ "meminfo=crashkernel=32M@0x50000000\0" \ "nfsroot=/nfsroot/arm\0" \ - "bootblock=" CONFIG_BOOTBLOCK "\0" \ - "ubiblock=" CONFIG_UBIBLOCK" \0" \ + "bootblock=10\0" \ + "ubiblock=9\0" \ "ubi=enabled\0" \ "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \ "mmcdev=0\0" \ @@ -128,11 +93,6 @@ #define CONFIG_USB_GADGET_DWC2_OTG_PHY -/* - * SPI Settings - */ -#define CONFIG_SOFT_SPI - #ifndef __ASSEMBLY__ void universal_spi_scl(int bit); void universal_spi_sda(int bit); @@ -164,9 +124,7 @@ int universal_spi_read(void); /* * LCD Settings */ -#define CONFIG_BMP_16BPP #define CONFIG_LD9040 -#define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) #endif /* __CONFIG_H */