X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fs32v234evb.h;h=e1f2cb30d3f27d208d3ecc6c363123e6fcded459;hb=3784c789e7e8de3d022ddf198b01e54b68971cd5;hp=9723bab77e1a3aae90f4ccf33fa973e0035b6b98;hpb=2313d48445e59f063ec9a3b4940fe8252737db76;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h
index 9723bab..e1f2cb3 100644
--- a/include/configs/s32v234evb.h
+++ b/include/configs/s32v234evb.h
@@ -18,9 +18,6 @@
 #define CONFIG_S32V234
 #define CONFIG_DM
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* Config GIC */
 #define CONFIG_GICV2
 #define GICD_BASE 0x7D001000
@@ -64,7 +61,6 @@
 #else
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 #endif
-#define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_DM_SERIAL
 #define CONFIG_FSL_LINFLEXUART
@@ -76,47 +72,27 @@
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SYS_UART_PORT		(1)
-#define CONFIG_BAUDRATE				115200
 
 #undef CONFIG_CMD_IMLS
 
-#define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC_BASE_ADDR
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
 #define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 /* #define CONFIG_CMD_EXT2 EXT2 Support */
-#define CONFIG_CMD_FAT		/* FAT support */
-#define CONFIG_DOS_PARTITION
 
 #if 0
 
 /* Ethernet config */
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE            ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE     RMII
 #define CONFIG_FEC_MXC_PHYADDR  0
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#endif
-
-#if 0				/* Disable until the I2C driver will be updated */
-
-/* I2C Configs */
-#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C0_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED		100000
 #endif
 
 #if 0				/* Disable until the FLASH will be implemented */
@@ -125,7 +101,6 @@
 
 #ifdef CONFIG_SYS_USE_NAND
 /* Nand Flash Configs */
-#define	CONFIG_CMD_NAND
 #define CONFIG_JFFS2_NAND
 #define MTD_NAND_FSL_NFC_SWECC 1
 #define CONFIG_NAND_FSL_NFC
@@ -136,12 +111,8 @@
 #define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif
 
-#define CONFIG_CMD_DHCP
-
 #define CONFIG_LOADADDR			0xC307FFC0
-#define CONFIG_BOOTARGS			"console=ttyLF0 root=/dev/ram rw"
 
-#define CONFIG_CMD_ENV
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"boot_scripts=boot.scr.uimg boot.scr\0" \
 	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
@@ -190,11 +161,9 @@
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER	/* use "hush" command parser */
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT		"=> "
 #undef CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		\
 			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
@@ -214,15 +183,8 @@
 #define CONFIG_SYS_MALLOC_BASE		(DDR_BASE_ADDR)
 #endif
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
-
 #if 0
 /* Configure PXE */
-#define CONFIG_CMD_PXE
 #define CONFIG_BOOTP_PXE
 #define CONFIG_BOOTP_PXE_CLIENTARCH	0x100
 #endif
@@ -242,11 +204,8 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 
 #define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0