X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fs32v234evb.h;h=e1f2cb30d3f27d208d3ecc6c363123e6fcded459;hb=3784c789e7e8de3d022ddf198b01e54b68971cd5;hp=33490c2869315065a507c5ddb0b4a948adc40008;hpb=43ade93bdb0c8bd57382be810a05b3793749ce85;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h
index 33490c2..e1f2cb3 100644
--- a/include/configs/s32v234evb.h
+++ b/include/configs/s32v234evb.h
@@ -72,7 +72,6 @@
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SYS_UART_PORT		(1)
-#define CONFIG_BAUDRATE				115200
 
 #undef CONFIG_CMD_IMLS
 
@@ -94,18 +93,6 @@
 #define IMX_FEC_BASE            ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE     RMII
 #define CONFIG_FEC_MXC_PHYADDR  0
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#endif
-
-#if 0				/* Disable until the I2C driver will be updated */
-
-/* I2C Configs */
-#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C0_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED		100000
 #endif
 
 #if 0				/* Disable until the FLASH will be implemented */
@@ -114,7 +101,6 @@
 
 #ifdef CONFIG_SYS_USE_NAND
 /* Nand Flash Configs */
-#define	CONFIG_CMD_NAND
 #define CONFIG_JFFS2_NAND
 #define MTD_NAND_FSL_NFC_SWECC 1
 #define CONFIG_NAND_FSL_NFC
@@ -126,9 +112,7 @@
 #endif
 
 #define CONFIG_LOADADDR			0xC307FFC0
-#define CONFIG_BOOTARGS			"console=ttyLF0 root=/dev/ram rw"
 
-#define CONFIG_CMD_ENV
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"boot_scripts=boot.scr.uimg boot.scr\0" \
 	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
@@ -180,7 +164,6 @@
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT		"=> "
 #undef CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		\
 			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
@@ -200,12 +183,6 @@
 #define CONFIG_SYS_MALLOC_BASE		(DDR_BASE_ADDR)
 #endif
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
-
 #if 0
 /* Configure PXE */
 #define CONFIG_BOOTP_PXE
@@ -227,11 +204,8 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 
 #define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0