X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fs32v234evb.h;h=33487cd86fee38403488bee51e9aed3053ef8777;hb=4125bbcef6a998ce8580a1f5c53c8c93a56a125b;hp=174f74f095939faa148f0b9fc910320d84eef0fd;hpb=19a9747535c105fa458d0c9929e6785cf56d1292;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h
index 174f74f..33487cd 100644
--- a/include/configs/s32v234evb.h
+++ b/include/configs/s32v234evb.h
@@ -18,8 +18,6 @@
 #define CONFIG_S32V234
 #define CONFIG_DM
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* Config GIC */
 #define CONFIG_GICV2
 #define GICD_BASE 0x7D001000
@@ -63,7 +61,6 @@
 #else
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 #endif
-#define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_DM_SERIAL
 #define CONFIG_FSL_LINFLEXUART
@@ -75,29 +72,21 @@
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SYS_UART_PORT		(1)
-#define CONFIG_BAUDRATE				115200
 
 #undef CONFIG_CMD_IMLS
 
-#define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC_BASE_ADDR
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
 #define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 /* #define CONFIG_CMD_EXT2 EXT2 Support */
-#define CONFIG_CMD_FAT		/* FAT support */
-#define CONFIG_DOS_PARTITION
 
 #if 0
 
 /* Ethernet config */
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
@@ -108,16 +97,6 @@
 #define CONFIG_PHY_MICREL
 #endif
 
-#if 0				/* Disable until the I2C driver will be updated */
-
-/* I2C Configs */
-#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C0_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED		100000
-#endif
-
 #if 0				/* Disable until the FLASH will be implemented */
 #define CONFIG_SYS_USE_NAND
 #endif
@@ -135,8 +114,6 @@
 #define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif
 
-#define CONFIG_CMD_DHCP
-
 #define CONFIG_LOADADDR			0xC307FFC0
 #define CONFIG_BOOTARGS			"console=ttyLF0 root=/dev/ram rw"
 
@@ -212,15 +189,8 @@
 #define CONFIG_SYS_MALLOC_BASE		(DDR_BASE_ADDR)
 #endif
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
-
 #if 0
 /* Configure PXE */
-#define CONFIG_CMD_PXE
 #define CONFIG_BOOTP_PXE
 #define CONFIG_BOOTP_PXE_CLIENTARCH	0x100
 #endif
@@ -240,9 +210,7 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)
 #define CONFIG_ENV_IS_IN_MMC