X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Frpi.h;h=5caf90a9ac2f3078889c2ffb51f4bdb890ce23bc;hb=4f66e09bb9fbc47b73f67c3cc08ee2663e8fcdb1;hp=7ad8d080215d1065cf5cbcbe37c2c54f390465cb;hpb=b724bd7d63498449d3960bbd3075ba94d7152890;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 7ad8d08..5caf90a 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -1,39 +1,52 @@ /* - * (C) Copyright 2012 Stephen Warren + * (C) Copyright 2012-2016 Stephen Warren * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __CONFIG_H #define __CONFIG_H #include +#include + +#if defined(CONFIG_TARGET_RPI_2) || defined(CONFIG_TARGET_RPI_3_32B) +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif /* Architecture, CPU, etc.*/ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_BCM2835 #define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_DCACHE_OFF + +/* Use SoC timer for AArch32, but architected timer for AArch64 */ +#ifndef CONFIG_ARM64 +#define CONFIG_SYS_TIMER_RATE 1000000 +#define CONFIG_SYS_TIMER_COUNTER \ + (&((struct bcm2835_timer_regs *)BCM2835_TIMER_PHYSADDR)->clo) +#endif + /* * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, * so 2708 has historically been used rather than a dedicated 2835 ID. + * + * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation + * chose to use someone else's previously registered machine ID (3139, MX51_GGC) + * rather than obtaining a valid ID:-/ + * + * For the bcm2837, hopefully a machine type is not needed, since everything + * is DT. */ +#ifdef CONFIG_BCM2835 #define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 +#endif /* Memory layout */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x00000000 +#ifdef CONFIG_ARM64 +#define CONFIG_SYS_TEXT_BASE 0x00080000 +#else #define CONFIG_SYS_TEXT_BASE 0x00008000 +#endif #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE /* * The board really has 256M. However, the VC (VideoCore co-processor) shares @@ -50,16 +63,12 @@ #define CONFIG_SYS_MEMTEST_END 0x00200000 #define CONFIG_LOADADDR 0x00200000 -/* Flash */ -#define CONFIG_SYS_NO_FLASH - /* Devices */ /* GPIO */ #define CONFIG_BCM2835_GPIO /* LCD */ -#define CONFIG_LCD #define CONFIG_LCD_DT_SIMPLEFB -#define LCD_BPP LCD_COLOR16 +#define LCD_BPP LCD_COLOR32 /* * Prevent allocation of RAM for FB; the real FB address is queried * dynamically from the VideoCore co-processor, and comes from RAM @@ -67,29 +76,28 @@ */ #define CONFIG_FB_ADDR 0 #define CONFIG_VIDEO_BCM2835 -#define CONFIG_SYS_WHITE_ON_BLACK - -/* SD/MMC configuration */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_SDHCI -#define CONFIG_MMC_SDHCI_IO_ACCESSORS -#define CONFIG_BCM2835_SDHCI -#define CONFIG_CMD_USB #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2 +#ifndef CONFIG_BCM2835 +#define CONFIG_USB_DWC2_REG_ADDR 0x3f980000 +#else #define CONFIG_USB_DWC2_REG_ADDR 0x20980000 -#define CONFIG_USB_STORAGE +#endif #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_TFTP_TSIZE #define CONFIG_MISC_INIT_R +#define CONFIG_SYS_USB_EVENT_POLL #endif /* Console UART */ +#ifdef CONFIG_BCM2837 +#define CONFIG_BCM283X_MU_SERIAL +#else #define CONFIG_PL01X_SERIAL +#endif #define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 115200 /* Console configuration */ #define CONFIG_SYS_CBSIZE 1024 @@ -105,23 +113,12 @@ #define CONFIG_FAT_WRITE #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_SYS_LOAD_ADDR 0x1000000 -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_PREBOOT "usb start" /* Shell */ -#define CONFIG_SYS_MAXARGS 8 -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_COMMAND_HISTORY - -/* Commands */ -#include -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_MMC -#define CONFIG_PARTITION_UUIDS -#define CONFIG_CMD_PART - -/* Device tree support */ -#define CONFIG_OF_BOARD_SETUP +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_CMDLINE_EDITING + /* ATAGs support for bootm/bootz */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG @@ -129,20 +126,24 @@ #include -/* Some things don't make sense on this HW or yet */ -#undef CONFIG_CMD_FPGA - /* Environment */ +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define ENV_DEVICE_SETTINGS \ - "stdin=serial,lcd\0" \ + "stdin=serial,usbkbd\0" \ "stdout=serial,lcd\0" \ "stderr=serial,lcd\0" /* * Memory layout for where various images get loaded by boot scripts: * - * scriptaddr can be pretty much anywhere that doesn't conflict with something - * else. Put it low in memory to avoid conflicts. + * I suspect address 0 is used as the SMP pen on the RPi2, so avoid this. + * + * fdt_addr_r simply shouldn't overlap anything else. However, the RPi's + * binary firmware loads a DT to address 0x100, so we choose this address to + * match it. This allows custom boot scripts to pass this DT on to Linux + * simply by not over-writing the data at this address. When using U-Boot, + * U-Boot (and scripts it executes) typicaly ignore the DT loaded by the FW + * and loads its own DT from disk (triggered by boot.scr or extlinux.conf). * * pxefile_addr_r can be pretty much anywhere that doesn't conflict with * something else. Put it low in memory to avoid conflicts. @@ -156,17 +157,19 @@ * this up to 16M allows for a sizable kernel to be decompressed below the * compressed load address. * - * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for - * the compressed kernel to be up to 16M too. + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Choosing 32M allows for the compressed kernel to be up to 16M. * * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows - * for the FDT/DTB to be up to 1M, which is hopefully plenty. + * for any boot script to be up to 1M, which is hopefully plenty. */ #define ENV_MEM_LAYOUT_SETTINGS \ - "scriptaddr=0x00000000\0" \ + "fdt_high=ffffffff\0" \ + "initrd_high=ffffffff\0" \ + "fdt_addr_r=0x00000100\0" \ "pxefile_addr_r=0x00100000\0" \ "kernel_addr_r=0x01000000\0" \ - "fdt_addr_r=0x02000000\0" \ + "scriptaddr=0x02000000\0" \ "ramdisk_addr_r=0x02100000\0" \ #define BOOT_TARGET_DEVICES(func) \ @@ -177,10 +180,10 @@ #include #define CONFIG_EXTRA_ENV_SETTINGS \ + "dhcpuboot=usb start; dhcp u-boot.uimg; bootm\0" \ ENV_DEVICE_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV -#define CONFIG_BOOTDELAY 2 #endif