X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Frk3288_common.h;h=9ddfe1daeb6c2a1553925c1330c798396a385021;hb=67171e13a3e0665b18c657a6704a22ca7900f4c3;hp=9d50d834db493340da8fff90941ab153a161c9e3;hpb=f3c264f9de6a5727c90ecf6d46d4747091c0a57f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index 9d50d83..9ddfe1d 100644
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -7,10 +7,9 @@
 #ifndef __CONFIG_RK3288_COMMON_H
 #define __CONFIG_RK3288_COMMON_H
 
-#define CONFIG_SYS_CACHELINE_SIZE	64
-
 #include <asm/arch/hardware.h>
 
+#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_ENV_SIZE			0x2000
@@ -26,22 +25,20 @@
 #define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMER_BASE + 8)
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SYS_NS16550_MEM32
 #define CONFIG_SPL_BOARD_INIT
 
+#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+/* Bootrom will load u-boot binary to 0x0 once return from SPL */
+#define CONFIG_SYS_TEXT_BASE		0x00000000
+#else
 #define CONFIG_SYS_TEXT_BASE		0x00100000
+#endif
 #define CONFIG_SYS_INIT_SP_ADDR		0x00100000
 #define CONFIG_SYS_LOAD_ADDR		0x00800800
 #define CONFIG_SPL_STACK		0xff718000
 #define CONFIG_SPL_TEXT_BASE		0xff704004
 
-#define CONFIG_ROCKCHIP_COMMON
-#define CONFIG_SPL_ROCKCHIP_COMMON
-
 #define CONFIG_SILENT_CONSOLE
 #ifndef CONFIG_SPL_BUILD
 # define CONFIG_SYS_CONSOLE_IS_IN_ENV
@@ -51,11 +48,9 @@
 /* MMC/SD IP block */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_SDHCI
 #define CONFIG_DWMMC
 #define CONFIG_BOUNCE_BUFFER
 
-#define CONFIG_DOS_PARTITION
 #define CONFIG_FAT_WRITE
 #define CONFIG_PARTITION_UUIDS
 #define CONFIG_CMD_PART
@@ -68,10 +63,6 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 
-#define CONFIG_SPL_PINCTRL_SUPPORT
-#define CONFIG_SPL_RAM_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-
 #define CONFIG_SYS_SDRAM_BASE		0
 #define CONFIG_NR_DRAM_BANKS		1
 #define SDRAM_BANK_SIZE			(2UL << 30)
@@ -81,6 +72,33 @@
 #define CONFIG_SF_DEFAULT_SPEED 20000000
 
 #ifndef CONFIG_SPL_BUILD
+/* usb otg */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_DWC2_OTG
+#define CONFIG_ROCKCHIP_USB2_PHY
+#define CONFIG_USB_GADGET_VBUS_DRAW	0
+
+/* fastboot  */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_FASTBOOT_FLASH
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV	1	/* eMMC */
+#define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE	0x08000000
+
+/* usb mass storage */
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_G_DNL_MANUFACTURER	"Rockchip"
+#define CONFIG_G_DNL_VENDOR_NUM		0x2207
+#define CONFIG_G_DNL_PRODUCT_NUM	0x320a
+
+/* Enable gpt partition table */
+#define CONFIG_CMD_GPT
+
 #include <config_distro_defaults.h>
 
 #define ENV_MEM_LAYOUT_SETTINGS \
@@ -90,6 +108,12 @@
 	"kernel_addr_r=0x02000000\0" \
 	"ramdisk_addr_r=0x04000000\0"
 
+#define CONFIG_RANDOM_UUID
+#define PARTS_DEFAULT \
+	"uuid_disk=${uuid_gpt_disk};" \
+	"name=boot,start=8M,size=64M,bootable,uuid=${uuid_gpt_boot};" \
+	"name=rootfs,size=-,uuid=${uuid_gpt_rootfs};\0" \
+
 /* First try to boot from SD (index 0), then eMMC (index 1 */
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
@@ -102,9 +126,13 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"fdt_high=0x1fffffff\0" \
 	"initrd_high=0x1fffffff\0" \
+	"partitions=" PARTS_DEFAULT \
 	ENV_MEM_LAYOUT_SETTINGS \
 	ROCKCHIP_DEVICE_SETTINGS \
 	BOOTENV
 #endif
 
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_PREBOOT
+
 #endif