X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Frk3288_common.h;h=910fe58822514f71d4e07cc3f9af18175fe8f3b3;hb=6d7dacf726ca043a3f5487549bbfa506c990c813;hp=72a54bc0ab2b600dd6b308a26c3c7f9bc70d4786;hpb=7f21ced0d2488605ccf6eb307daa9e18ee78aa94;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index 72a54bc..910fe58 100644
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -6,16 +6,18 @@
 #ifndef __CONFIG_RK3288_COMMON_H
 #define __CONFIG_RK3288_COMMON_H
 
-#include <asm/arch/hardware.h>
+#include <asm/arch-rockchip/hardware.h>
 #include "rockchip-common.h"
 
+#define CONFIG_SYS_BOOTM_LEN		(64 << 20) /* 64MB */
+
 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
-#define CONFIG_SYS_MALLOC_LEN		(32 << 20)
 #define CONFIG_SYS_CBSIZE		1024
 
-#define CONFIG_SYS_TIMER_RATE		(24 * 1000 * 1000)
-#define	CONFIG_SYS_TIMER_BASE		0xff810020 /* TIMER7 */
-#define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMER_BASE + 8)
+#define CONFIG_ROCKCHIP_STIMER_BASE	0xff810020
+#define COUNTER_FREQUENCY		24000000
+#define CONFIG_SYS_ARCH_TIMER
+#define CONFIG_SYS_HZ_CLOCK		24000000
 
 #ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM
 /* Bootrom will load u-boot binary to 0x0 once return from SPL */
@@ -23,14 +25,10 @@
 #define CONFIG_SYS_INIT_SP_ADDR		0x00100000
 #define CONFIG_SYS_LOAD_ADDR		0x00800800
 #define CONFIG_SPL_STACK		0xff718000
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
-# define CONFIG_SPL_TEXT_BASE		0x0
-#else
-# define CONFIG_SPL_TEXT_BASE		0xff704000
-#endif
+
+#define CONFIG_IRAM_BASE		0xff700000
 
 /* RAW SD card / eMMC locations. */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(128 << 10)
 
 /* FAT sd card locations. */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
@@ -40,13 +38,10 @@
 #define SDRAM_BANK_SIZE			(2UL << 30)
 #define SDRAM_MAX_SIZE			0xfe000000
 
-#ifndef CONFIG_SPL_BUILD
-/* usb otg */
+#define CONFIG_SYS_MONITOR_LEN (600 * 1024)
 
-/* usb mass storage */
-#define CONFIG_CMD_USB_MASS_STORAGE
+#ifndef CONFIG_SPL_BUILD
 
-/* usb host support */
 #define ENV_MEM_LAYOUT_SETTINGS \
 	"scriptaddr=0x00000000\0" \
 	"pxefile_addr_r=0x00100000\0" \
@@ -68,6 +63,4 @@
 	BOOTENV
 #endif
 
-#define CONFIG_PREBOOT
-
 #endif