X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fr7780mp.h;h=a7b36282988cce9dacaa16cd2730614eb022b7af;hb=393ff47ba3123208f7c4f08d63f114300a41d0c4;hp=7b6867d101ecdd2e6de41bb1ebbb547c212d348c;hpb=8dd29c87ba370072a8464b8cc19e0a1e6e0497b4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 7b6867d..a7b3628 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -60,6 +60,7 @@
 /* check for keypress on bootdelay==0 */
 /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
 
+#define CONFIG_SYS_TEXT_BASE		0x0FFC0000
 #define CONFIG_SYS_SDRAM_BASE		(0x08000000)
 #define CONFIG_SYS_SDRAM_SIZE		(128 * 1024 * 1024)
 
@@ -69,11 +70,9 @@
 #define CONFIG_SYS_PBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_BARGSIZE	512
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
 
 #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END		(TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - 0x100000)
 
 /* Flash board support */
 #define CONFIG_SYS_FLASH_BASE		(0xA0000000)
@@ -100,8 +99,6 @@
 /* Size of DRAM reserved for malloc() use */
 #define CONFIG_SYS_MALLOC_LEN		(1204 * 1024)
 
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 #define CONFIG_SYS_RX_ETH_BUFFER	(8)
 
@@ -121,7 +118,7 @@
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
-#define TMU_CLK_DIVIDER		4
+#define CONFIG_SYS_TMU_CLK_DIV		4
 #define CONFIG_SYS_HZ		1000
 
 /* PCI Controller */
@@ -144,15 +141,16 @@
 #define CONFIG_PCI_IO_BUS	0xFE200000	/* IO space base address */
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x00200000	/* Size of IO window */
+#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_BUS  CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
 #endif /* CONFIG_CMD_PCI */
 
 #if defined(CONFIG_CMD_NET)
 /*
-#define CONFIG_NET_MULTI
 #define CONFIG_RTL8169
 */
-/* AX88696L Support(NE2000 base chip) */
-#define CONFIG_DRIVER_NE2000
+/* AX88796L Support(NE2000 base chip) */
 #define CONFIG_DRIVER_AX88796L
 #define CONFIG_DRIVER_NE2000_BASE	0xA4100000
 #endif
@@ -168,6 +166,7 @@
 #define CONFIG_SYS_ATA_DATA_OFFSET     0x1000          /* data reg offset */
 #define CONFIG_SYS_ATA_REG_OFFSET      0x1000          /* reg offset */
 #define CONFIG_SYS_ATA_ALT_OFFSET      0x800           /* alternate register offset */
+#define CONFIG_IDE_SWAP_IO
 #endif /* CONFIG_CMD_IDE */
 
 #endif /* __R7780RP_H */