X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fr0p7734.h;h=3e4ef763c92a96064136726006cff89b4a9b2afb;hb=29d280c88a1ff331dce2d4c7a5aaf2402aa0fd8a;hp=f7412f06dee0cf154681a51134359cb65b400344;hpb=73eed452b9c9827474c0789c30729dca6fcf061d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h
index f7412f0..3e4ef76 100644
--- a/include/configs/r0p7734.h
+++ b/include/configs/r0p7734.h
@@ -1,77 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuation settings for the Renesas Solutions r0p7734 board
  *
  * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __R0P7734_H
 #define __R0P7734_H
 
 #define CONFIG_CPU_SH7734	1
-#define CONFIG_R0P7734		1
 #define CONFIG_400MHZ_MODE	1
-/* #define CONFIG_533MHZ_MODE	1 */
-
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
-
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_ENV
-
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_BOOTARGS		"console=ttySC3,115200"
 
 #define CONFIG_DISPLAY_BOARDINFO
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
 /* Ether */
-#define CONFIG_SH_ETHER 1
 #define CONFIG_SH_ETHER_USE_PORT (0)
 #define CONFIG_SH_ETHER_PHY_ADDR (0x0)
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC 1
 #define CONFIG_BITBANGMII
 #define CONFIG_BITBANGMII_MULTI
 #define CONFIG_SH_ETHER_SH7734_MII (0x00) /* MII */
 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
-#ifndef CONFIG_SH_ETHER
-# define CONFIG_SMC911X
-# define CONFIG_SMC911X_16_BIT
-# define CONFIG_SMC911X_BASE (0x84000000)
-#endif
-
-/* I2C */
-#define CONFIG_SH_SH7734_I2C	1
-#define CONFIG_HARD_I2C			1
-#define CONFIG_I2C_MULTI_BUS	1
-#define CONFIG_SYS_MAX_I2C_BUS	2
-#define CONFIG_SYS_I2C_MODULE	0
-#define CONFIG_SYS_I2C_SPEED	100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE	0x50
-#define CONFIG_SH_I2C_DATA_HIGH	4
-#define CONFIG_SH_I2C_DATA_LOW	5
-#define CONFIG_SH_I2C_CLOCK		500000000
-#define CONFIG_SH_I2C_BASE0		0xFFC70000
-#define CONFIG_SH_I2C_BASE1		0xFFC7100
 
 /* undef to save memory	*/
-#define CONFIG_SYS_LONGHELP
-/* Monitor Command Prompt */
-/* Buffer size for input from the Console */
-#define CONFIG_SYS_CBSIZE		256
-/* Buffer size for Console output */
-#define CONFIG_SYS_PBSIZE		256
-/* max args accepted for monitor commands */
-#define CONFIG_SYS_MAXARGS		16
-/* Buffer size for Boot Arguments passed to kernel */
-#define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
 
 /* SCIF */
-#define CONFIG_SCIF_CONSOLE	1
 #define CONFIG_SCIF			1
 #define CONFIG_CONS_SCIF3	1
 
@@ -85,7 +41,6 @@
 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
 #define CONFIG_SYS_MEMTEST_END	 (CONFIG_SYS_MEMTEST_START + 100 * 1024 * 1024)
 /* Enable alternate, more extensive, memory test */
-#undef  CONFIG_SYS_ALT_MEMTEST
 /* Scratch address used by the alternate memory test */
 #undef  CONFIG_SYS_MEMTEST_SCRATCH
 
@@ -93,8 +48,6 @@
 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE
 
 /* FLASH */
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_CFI
 #undef  CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BASE	(0xA0000000)
@@ -117,7 +70,6 @@
  * Use hardware flash sectors protection instead
  * of U-Boot software protection
  */
-#undef  CONFIG_SYS_FLASH_PROTECTION
 #undef  CONFIG_SYS_DIRECT_FLASH_TFTP
 
 /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
@@ -129,7 +81,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
 
 /* ENV setting */
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE	1
 #define CONFIG_ENV_SECT_SIZE	(128 * 1024)
 #define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
@@ -144,8 +95,6 @@
 #else
 #define CONFIG_SYS_CLK_FREQ 44444444
 #endif
-#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_TMU_CLK_DIV      4
 
 #endif	/* __R0P7734_H */