X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fqong.h;h=c61a689e576fbe48c522f05c105b3fd68f1089b2;hb=909e9bf3ae6195ac6d52f9e453fba2be8e7e947f;hp=b1aca93ddead16f5bf6a0c9ffb77f13768b6e9a7;hpb=d7dc464be4ee246ecab6c7934b322b5aaecfe5f6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/qong.h b/include/configs/qong.h
index b1aca93..c61a689 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -22,7 +22,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/arch/mx31-regs.h>
+#include <asm/arch/imx-regs.h>
 
  /* High Level Configuration Options */
 #define CONFIG_ARM1136		1	/* This is an arm1136 CPU core */
@@ -43,7 +43,6 @@
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)
 /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
 
 /*
  * Hardware drivers
@@ -53,6 +52,7 @@
 #define CONFIG_SYS_MX31_UART1	1
 
 #define CONFIG_MXC_GPIO
+#define CONFIG_HW_WATCHDOG
 
 #define CONFIG_MXC_SPI
 #define CONFIG_DEFAULT_SPI_BUS	1
@@ -102,6 +102,7 @@
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SUPPORT_VFAT
+#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #endif /* CONFIG_CMD_USB */
 
@@ -124,25 +125,16 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_SPI
-#define CONFIG_CMD_DATE
-#define BOARD_LATE_INIT
 
-/*
- * You can compile in a MAC address and your custom net settings by using
- * the following syntax.
- *
- * #define CONFIG_ETHADDR		xx:xx:xx:xx:xx:xx
- * #define CONFIG_SERVERIP		<server ip>
- * #define CONFIG_IPADDR		<board ip>
- * #define CONFIG_GATEWAYIP		<gateway ip>
- * #define CONFIG_NETMASK		<your netmask>
- */
+#define BOARD_LATE_INIT
 
 #define CONFIG_BOOTDELAY	5
 
@@ -164,7 +156,7 @@
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
 	"addmisc=setenv bootargs ${bootargs}\0"				\
 	"uboot_addr=A0000000\0"						\
-	"kernel_addr=A00A0000\0"					\
+	"kernel_addr=A00C0000\0"					\
 	"ramdisk_addr=A0300000\0"					\
 	"u-boot=qong/u-boot.bin\0"					\
 	"kernel_addr_r=80800000\0"					\
@@ -296,17 +288,20 @@ extern int qong_nand_rdy(void *chip);
 #define CONFIG_LZO
 #define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT		"nor0=physmap-flash.0"
+#define MTDIDS_DEFAULT		"nor0=physmap-flash.0,"		\
+				"nand0=gen_nand"
 #define MTDPARTS_DEFAULT	\
-	"mtdparts=physmap-flash.0:384k(U-Boot),128k(env1),"	\
-	"128k(env2),2432k(kernel),13m(ramdisk),-(user)"
+	"mtdparts=physmap-flash.0:"				\
+			"512k(U-Boot),128k(env1),128k(env2),"	\
+			"2304k(kernel),13m(ramdisk),-(user);"	\
+		"gen_nand:"					\
+			"128m(nand)"
 
-/* additions for new relocation code, must added to all boards */
-#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
+/* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_END		IRAM_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE		IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)
 
 #define CONFIG_BOARD_EARLY_INIT_F	1