X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fqemu-x86.h;h=49e307b4300696d00828ad2138fdd18090787369;hb=c9d1ff70e236a0d78ac07bdbadb5d6d7e8896361;hp=1b544c119e7a08fce0a0e96b387dd39d6862512a;hpb=79c884d7e449a63fa8f07b7495f8f9873355c48f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h
index 1b544c1..49e307b 100644
--- a/include/configs/qemu-x86.h
+++ b/include/configs/qemu-x86.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -11,39 +10,31 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <configs/x86-common.h>
-
-#define CONFIG_SYS_MONITOR_LEN		(1 << 20)
-#define CONFIG_ARCH_MISC_INIT
+#include <linux/sizes.h>
 
-#define CONFIG_PCI_MEM_BUS		0xc0000000
-#define CONFIG_PCI_MEM_PHYS		CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE		0x10000000
+#define BOOT_TARGET_DEVICES(func) \
+	func(USB, usb, 0) \
+	func(SCSI, scsi, 0) \
+	func(VIRTIO, virtio, 0) \
+	func(IDE, ide, 0) \
+	func(DHCP, dhcp, na)
 
-#define CONFIG_PCI_PREF_BUS		0xd0000000
-#define CONFIG_PCI_PREF_PHYS		CONFIG_PCI_PREF_BUS
-#define CONFIG_PCI_PREF_SIZE		0x10000000
+#include <config_distro_bootcmd.h>
+#include <configs/x86-common.h>
 
-#define CONFIG_PCI_IO_BUS		0x2000
-#define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE		0xe000
+#define CONFIG_PREBOOT "pci enum"
 
-#define CONFIG_PCI_PNP
+#define CONFIG_SYS_MONITOR_LEN		(1 << 20)
 
-#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,vga\0" \
-					"stdout=serial,vga\0" \
-					"stderr=serial,vga\0"
+#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,i8042-kbd\0" \
+					"stdout=serial,vidconsole\0" \
+					"stderr=serial,vidconsole\0"
 
 /*
  * ATA/SATA support for QEMU x86 targets
  *   - Only legacy IDE controller is supported for QEMU '-M pc' target
  *   - AHCI controller is supported for QEMU '-M q35' target
- *
- * Default configuraion is to support the QEMU default x86 target
- * Undefine CONFIG_CMD_IDE to support q35 target
  */
-#define CONFIG_CMD_IDE
-#ifdef CONFIG_CMD_IDE
 #define CONFIG_SYS_IDE_MAXBUS		2
 #define CONFIG_SYS_IDE_MAXDEVICE	4
 #define CONFIG_SYS_ATA_BASE_ADDR	0
@@ -54,20 +45,6 @@
 #define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
 #define CONFIG_ATAPI
 
-#undef CONFIG_SCSI_AHCI
-#undef CONFIG_CMD_SCSI
-#else
-#define CONFIG_SCSI_DEV_LIST		\
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI}
-#endif
-
-/* GPIO is not supported */
-#undef CONFIG_INTEL_ICH6_GPIO
-#undef CONFIG_CMD_GPIO
-
-/* SPI is not supported */
-#undef CONFIG_ICH_SPI
-#undef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SPL_BOARD_LOAD_IMAGE
 
 #endif	/* __CONFIG_H */