X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fqemu-ppce500.h;h=6f061b520f017adf9ec9ac847ffa167593410243;hb=3784c789e7e8de3d022ddf198b01e54b68971cd5;hp=763a47ac3dc445566d214ddb69de70928818d5ea;hpb=05d134b084590684bcf4d832c0035952727b7cd9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h
index 763a47a..6f061b5 100644
--- a/include/configs/qemu-ppce500.h
+++ b/include/configs/qemu-ppce500.h
@@ -10,22 +10,13 @@
 #ifndef __QEMU_PPCE500_H
 #define __QEMU_PPCE500_H
 
-#define CONFIG_CMD_REGINFO
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500			/* BOOKE e500 family */
-#define CONFIG_QEMU_E500
-
 #undef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xf01000 /* 15 MB */
-#define CONFIG_SYS_GENERIC_BOARD
 
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 
 #define CONFIG_SYS_RAMBOOT
 
-#define CONFIG_PCI			/* Enable PCI/PCIE */
 #define CONFIG_PCI1		1	/* PCI controller 1 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
@@ -43,15 +34,18 @@
 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
 /* Needed to fill the ccsrbar pointer */
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /* Virtual address to CCSRBAR */
 #define CONFIG_SYS_CCSRBAR		0xe0000000
 /* Physical address should be a function call */
 #ifndef __ASSEMBLY__
 extern unsigned long long get_phys_ccsrbar_addr_early(void);
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH (get_phys_ccsrbar_addr_early() >> 32)
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW get_phys_ccsrbar_addr_early()
+#else
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
 #endif
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 
 /* Virtual address range for PCI region maps */
 #define CONFIG_SYS_PCI_MAP_START	0x80000000
@@ -71,14 +65,10 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 #define CONFIG_SYS_CLK_FREQ        33000000
 
-#define CONFIG_SYS_NO_FLASH
-
 #define CONFIG_SYS_BOOT_BLOCK		0x00000000	/* boot TLB */
 
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_ENV_IS_NOWHERE
-
 #define CONFIG_HWCONFIG
 
 #define CONFIG_SYS_INIT_RAM_ADDR		0x00100000
@@ -98,7 +88,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
 #define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0))
@@ -109,19 +98,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
-
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
@@ -129,17 +105,11 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-#define CONFIG_E1000
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 #define CONFIG_LBA48
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 
 /*
  * Environment
@@ -153,20 +123,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
-
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
-#endif
 
 /*
  * Miscellaneous configurable options
@@ -175,7 +131,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
@@ -198,9 +153,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BAUDRATE	115200
-
-#define CONFIG_BOOTDELAY        1
 #define CONFIG_BOOTCOMMAND		\
 	"test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"