X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fqemu-ppce500.h;h=60a17dbcdcdd67c4bbbc071560a220c123e758f2;hb=eaf6ea6a1dc10d49cdcbcad0f8b0abb6c1eb1db1;hp=03b08968f662ec50c4a6f3814c38398ed1ffa55c;hpb=08649c3d50b1ca014a9e0bf87c724f99f88a20ce;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h
index 03b0896..60a17db 100644
--- a/include/configs/qemu-ppce500.h
+++ b/include/configs/qemu-ppce500.h
@@ -13,17 +13,8 @@
 
 #define CONFIG_SYS_RAMBOOT
 
-#define CONFIG_PCI1		1	/* PCI controller 1 */
-#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
-#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
-
-#define CONFIG_ENV_OVERWRITE
-
 #define CONFIG_ENABLE_36BIT_PHYS
 
-#define CONFIG_ADDR_MAP
-#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
-
 /* Needed to fill the ccsrbar pointer */
 
 /* Virtual address to CCSRBAR */
@@ -40,7 +31,7 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 /* Virtual address range for PCI region maps */
 #define CONFIG_SYS_PCI_MAP_START	0x80000000
-#define CONFIG_SYS_PCI_MAP_END		0xe8000000
+#define CONFIG_SYS_PCI_MAP_END		0xe0000000
 
 /* Virtual address to a temporary map if we need it (max 128MB) */
 #define CONFIG_SYS_TMPVIRT		0xe8000000
@@ -52,14 +43,8 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_CHIP_SELECTS_PER_CTRL	0
-
-#define CONFIG_SYS_CLK_FREQ        33000000
-
 #define CONFIG_SYS_BOOT_BLOCK		0x00000000	/* boot TLB */
 
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
-
 #define CONFIG_HWCONFIG
 
 #define CONFIG_SYS_INIT_RAM_ADDR		0x00100000
@@ -71,36 +56,15 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 #define CONFIG_SYS_INIT_RAM_SIZE		0x00004000
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0))
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif	/* CONFIG_PCI */
 
 #define CONFIG_LBA48
 
+/* RTC */
+#define CONFIG_RTC_PT7C4338
+
 /*
  * Environment
  */
@@ -110,7 +74,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
 /*
  * For booting Linux, the board info and command line data
@@ -124,13 +87,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
  * Environment Configuration
  */
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	"u-boot.bin"	/* U-Boot image on TFTP server*/
 
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
-#define CONFIG_BOOTCOMMAND		\
-	"test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"
-
 #endif	/* __QEMU_PPCE500_H */