X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fqemu-ppce500.h;h=47fb181693247ed209af4c7de2fe25c96983004d;hb=a09fea1d28fe3c69a64bee092f5a764274d26ca2;hp=73b377155cff8d717f6c3b6bb41c664ca3148728;hpb=a212d6966bfcf393e82e44246d7dfb6de032e82a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h
index 73b3771..47fb181 100644
--- a/include/configs/qemu-ppce500.h
+++ b/include/configs/qemu-ppce500.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2011-2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -10,21 +9,10 @@
 #ifndef __QEMU_PPCE500_H
 #define __QEMU_PPCE500_H
 
-#define CONFIG_CMD_REGINFO
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500			/* BOOKE e500 family */
-#define CONFIG_QEMU_E500
-
-#undef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xf01000 /* 15 MB */
-
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 
 #define CONFIG_SYS_RAMBOOT
 
-#define CONFIG_PCI			/* Enable PCI/PCIE */
 #define CONFIG_PCI1		1	/* PCI controller 1 */
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
@@ -38,11 +26,8 @@
 
 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-#define CONFIG_SYS_ALT_MEMTEST
-#define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
 /* Needed to fill the ccsrbar pointer */
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /* Virtual address to CCSRBAR */
 #define CONFIG_SYS_CCSRBAR		0xe0000000
@@ -56,8 +41,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
 #endif
 
-#define CONFIG_PHYS_64BIT
-
 /* Virtual address range for PCI region maps */
 #define CONFIG_SYS_PCI_MAP_START	0x80000000
 #define CONFIG_SYS_PCI_MAP_END		0xe8000000
@@ -76,14 +59,10 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 #define CONFIG_SYS_CLK_FREQ        33000000
 
-#define CONFIG_SYS_NO_FLASH
-
 #define CONFIG_SYS_BOOT_BLOCK		0x00000000	/* boot TLB */
 
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_ENV_IS_NOWHERE
-
 #define CONFIG_HWCONFIG
 
 #define CONFIG_SYS_INIT_RAM_ADDR		0x00100000
@@ -102,7 +81,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
-#define CONFIG_CONS_INDEX	1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0))
@@ -120,44 +98,26 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif	/* CONFIG_PCI */
 
 #define CONFIG_LBA48
-#define CONFIG_DOS_PARTITION
 
 /*
  * Environment
  */
-#define CONFIG_ENV_SIZE		0x2000
 
 #define CONFIG_LOADS_ECHO		/* echo on for serial download */
 
-#define CONFIG_LAST_STAGE_INIT
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_IRQ
-
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#endif
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
-#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
-#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -177,9 +137,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR		1000000
 
-#define CONFIG_BAUDRATE	115200
-
-#define CONFIG_BOOTDELAY        1
 #define CONFIG_BOOTCOMMAND		\
 	"test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"