X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpxm2.h;h=4f24b13f500edd90c46ea6ee74960669d5ef0544;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=99a201c4035e37eae887c680e3f1300a1cdd6423;hpb=cbe7706ab8aab06c18edaa9b120371f9c8012728;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index 99a201c..4f24b13 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * siemens pxm2
  * (C) Copyright 2013 Siemens Schweiz AG
@@ -7,20 +8,13 @@
  * U-Boot file:/include/configs/am335x_evm.h
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_PXM2_H
 #define __CONFIG_PXM2_H
 
-#define CONFIG_SIEMENS_PXM2
-#define MACH_TYPE_PXM2			4309
-#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_PXM2
-
 #include "siemens-am33x-common.h"
 
-#define CONFIG_SYS_MPUCLK	720
 #define DDR_IOCTRL_VAL		0x18b
 #define DDR_PLL_FREQ		266
 
@@ -36,23 +30,7 @@
  /* Physical Memory Map */
 #define CONFIG_MAX_RAM_BANK_SIZE	(512 << 20)	/* 1GB */
 
-/* I2C Configuration */
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x300
-
-#define CONFIG_PHY_ATHEROS
-
-#define CONFIG_FACTORYSET
-
-/* Watchdog */
-#define CONFIG_OMAP_WATCHDOG
-
-#ifndef CONFIG_SPL_BUILD
-
 /* Use common default */
-#define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V1
 
 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -87,59 +65,4 @@
 		"bootm ${kloadaddr}\0" \
 	""
 
-#ifndef CONFIG_RESTORE_FLASH
-/* set to negative value for no autoboot */
-
-#define CONFIG_BOOTCOMMAND \
-	"if dfubutton; then " \
-		"run dfu_start; " \
-		"reset; " \
-	"fi; " \
-	"if mmc rescan; then " \
-		"echo SD/MMC found on device ${mmc_dev};" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run mmc_load_uimage; then " \
-			"run mmc_args;" \
-			"bootm ${kloadaddr};" \
-		"fi;" \
-	"fi;" \
-	"run nand_boot;" \
-	"reset;"
-
-#else
-
-#define CONFIG_BOOTCOMMAND			\
-	"setenv autoload no; "			\
-	"dhcp; "				\
-	"if tftp 80000000 debrick.scr; then "	\
-		"source 80000000; "		\
-	"fi"
-#endif
-#endif	/* CONFIG_SPL_BUILD */
-
-#define CONFIG_VIDEO
-#if defined(CONFIG_VIDEO)
-#define CONFIG_VIDEO_DA8XX
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_CMD_BMP
-#define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
-#define PWM_TICKS	0x1388
-#define PWM_DUTY	0x200
-#define CONFIG_SYS_CONSOLE_BG_COL	0xff
-#define CONFIG_SYS_CONSOLE_FG_COL	0x00
-#endif
-
 #endif	/* ! __CONFIG_PXM2_H */