X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpresidio_asic.h;h=fcec8b0038a2f1718a723fee11f43652e48666d4;hb=06ddcfc95a0eb1cf17c1436bfeb3cc4d056fdb3a;hp=34235b5a00c1bf662b456377829b2838ca60b4c9;hpb=6e7d7aa2e2062995c1cbc3af81cf40c04c50ad30;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h
index 34235b5..fcec8b0 100644
--- a/include/configs/presidio_asic.h
+++ b/include/configs/presidio_asic.h
@@ -2,34 +2,25 @@
 /*
  * Copyright (C) 2020 Cortina Access Inc.
  *
- * Configuration for Cortina-Access Presidio board.
+ * Configuration for Cortina-Access Presidio board
  */
 
 #ifndef __PRESIDIO_ASIC_H
 #define __PRESIDIO_ASIC_H
 
-#define CONFIG_REMAKE_ELF
-
-#define CONFIG_SUPPORT_RAW_INITRD
-
 #define CONFIG_SYS_INIT_SP_ADDR		0x00100000
 #define CONFIG_SYS_BOOTM_LEN		0x00c00000
 
 /* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		25000000
-#define CONFIG_SYS_TIMER_RATE		COUNTER_FREQUENCY
+#define CONFIG_SYS_TIMER_RATE		25000000
 #define CONFIG_SYS_TIMER_COUNTER	0xf4321008
 
 /* note: arch/arm/cpu/armv8/start.S which references GICD_BASE/GICC_BASE
  * does not yet support DT. Thus define it here.
  */
-#define CONFIG_GICV2
 #define GICD_BASE			0xf7011000
 #define GICC_BASE			0xf7012000
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (8 << 20))
-
 #define CONFIG_SYS_TIMER_BASE		0xf4321000
 
 /* Use external clock source */
@@ -44,13 +35,6 @@
 #define CONFIG_SYS_SERIAL0		PER_UART0_CFG
 #define CONFIG_SYS_SERIAL1		PER_UART1_CFG
 
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR		(DDR_BASE + 0x10000000)
-#define CONFIG_LAST_STAGE_INIT
-
 /* SDRAM Bank #1 */
 #define DDR_BASE			0x00000000
 #define PHYS_SDRAM_1			DDR_BASE
@@ -58,13 +42,28 @@
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
 /* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#define KSEG1_ATU_XLAT(x) (x)
+
+/* HW REG ADDR */
+#define NI_READ_POLL_COUNT                      1000
+#define CA_NI_MDIO_REG_BASE                     0xF4338
+#define NI_HV_GLB_MAC_ADDR_CFG0_OFFSET          0x010
+#define NI_HV_GLB_MAC_ADDR_CFG1_OFFSET          0x014
+#define NI_HV_PT_BASE                           0x400
+#define NI_HV_XRAM_BASE                         0x820
+#define GLOBAL_BLOCK_RESET_OFFSET               0x04
+#define GLOBAL_GLOBAL_CONFIG_OFFSET             0x20
+#define GLOBAL_IO_DRIVE_CONTROL_OFFSET          0x4c
 
 /* max command args */
-#define CONFIG_SYS_MAXARGS		64
 #define CONFIG_EXTRA_ENV_SETTINGS	"silent=y\0"
 
+/* nand driver parameters */
+#ifdef CONFIG_TARGET_PRESIDIO_ASIC
+	#define CONFIG_SYS_MAX_NAND_DEVICE      1
+	#define CONFIG_SYS_NAND_BASE            CONFIG_SYS_FLASH_BASE
+	#define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
+#endif
+
 #endif /* __PRESIDIO_ASIC_H */