X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fppmc8260.h;h=5dcd9cc0d03bd800e6c24bec12d3d6db0b92f883;hb=23c5d253d5fa4586e2342934a0a8ec21c1f21a36;hp=7018a8c3c78d2f4acf9b96b77cb1894cf0260696;hpb=6d8d4ef994a7c46e34b5fe53b1af7aa4f78192bf;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index 7018a8c..5dcd9cc 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -12,23 +12,7 @@
  *
  * Configuation settings for the WindRiver PPMC8260 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -283,7 +267,6 @@
 #define CONFIG_SYS_LONGHELP
 
 /* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT		"=> "
 
 
 /*
@@ -310,7 +293,6 @@
  *
  *****************************************************************************/
 
-#define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
 #define CONFIG_PPMC8260		1	/* on an Wind River PPMC8260 Board  */
 #define CONFIG_CPM2		1	/* Has a CPM2 */
 
@@ -331,7 +313,6 @@
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	   */
 
 #define CONFIG_SYS_LOAD_ADDR		0x140000   /* default load address */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 #define CONFIG_SYS_MEMTEST_START	0x2000	/* memtest works from the end of */
 					/* the exception vector table */
@@ -346,9 +327,6 @@
 #define CONFIG_SYS_MEMTEST_END		( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
 				- CONFIG_SYS_MEM_END_USAGE )
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -372,8 +350,8 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-#define CONFIG_SYS_CMXFCR_MASK		(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+#define CONFIG_SYS_CMXFCR_MASK2		(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+#define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 #define CONFIG_SYS_CPMFCR_RAMTYPE	0
 #define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 #endif	/* CONFIG_ETHER_INDEX */
@@ -422,9 +400,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x4000	/* Size of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------