X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpm9g45.h;h=3a59045df7fe7ac4878dceda94b9f7a78147c3a8;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=8c181e64afdbcd662a4249730a45b1d81a626de2;hpb=f0fcab6f8e11cee6d6b81a08fbfc641f6fcce0ec;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 8c181e6..3a59045 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -19,19 +19,6 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE           0x70000000
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
@@ -50,38 +37,14 @@
 #define CONFIG_SYS_NAND_MASK_CLE		BIT(22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PD3
-#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
 #endif
 
-/* Ethernet */
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
-#define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		0x23e00000
-
 #ifdef CONFIG_NAND_BOOT
 /* bootstrap + u-boot + env in nandflash */
-
-#define CONFIG_BOOTCOMMAND						\
-	"nand read 0x70000000 0x200000 0x300000;"			\
-	"bootm 0x70000000"
 #elif CONFIG_SD_BOOT
 /* bootstrap + u-boot + env + linux in mmc */
-
-#define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x71000000 dtb; " \
-				"fatload mmc 0:1 0x72000000 zImage; " \
-				"bootz 0x72000000 - 0x71000000"
 #endif
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + \
-					      128 * 1024, 0x1000)
-
 /* Defines for SPL */
 #define CONFIG_SPL_MAX_SIZE		0x010000
 #define CONFIG_SPL_STACK		0x310000
@@ -95,25 +58,14 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x70080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000
 
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 
 #elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
-#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
-#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCSIZE		256
 #define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
 					  48, 49, 50, 51, 52, 53, 54, 55, \
 					  56, 57, 58, 59, 60, 61, 62, 63, }