X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpm9g45.h;h=22b3c2e2d16bf39958c274f0be4c69fe07996ada;hb=a1dc980d88a5c9c2b99251c8d8299b0c8948de73;hp=e0c388e70c687910a6f30fa96e1d8d0aad499ecd;hpb=60390d70be7336b2441f5f69bd4f5affa83d064d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index e0c388e..22b3c2e 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -25,7 +25,6 @@
 #define CONFIG_PM9G45		1	/* It's an Ronetix PM9G45 */
 #define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9G45"
 
-#define MACH_TYPE_PM9G45	2672
 #define CONFIG_MACH_TYPE	MACH_TYPE_PM9G45
 
 /* ARM asynchronous clock */
@@ -40,7 +39,6 @@
 #define CONFIG_INITRD_TAG	1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers
@@ -54,10 +52,9 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIO_PORTD, 31 /* this is the user1 led */
-#define	CONFIG_GREEN_LED	AT91_PIO_PORTD, 0 /* this is the user2 led */
+#define CONFIG_RED_LED		GPIO_PIN_PD(31) /* this is the user1 led */
+#define CONFIG_GREEN_LED	GPIO_PIN_PD(0)  /* this is the user2 led */
 
-#define CONFIG_BOOTDELAY	3
 
 /*
  * BOOTP options
@@ -70,15 +67,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PING		1
-#define CONFIG_CMD_DHCP		1
 #define CONFIG_CMD_NAND		1
-#define CONFIG_CMD_USB		1
 
 #define CONFIG_CMD_JFFS2		1
 #define CONFIG_JFFS2_CMDLINE		1
@@ -92,10 +81,6 @@
 #define PHYS_SDRAM			0x70000000
 #define PHYS_SDRAM_SIZE			0x08000000	/* 128 megs */
 
-/* NOR flash, not available */
-#define CONFIG_SYS_NO_FLASH		1
-#undef CONFIG_CMD_FLASH
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
@@ -106,8 +91,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIO_PORTD, 3
+#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN	GPIO_PIN_PD(3)
 
 #endif
 
@@ -121,12 +106,10 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW		1
-#define CONFIG_DOS_PARTITION		1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT	1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE	0x00700000 /* _UHP_OHCI_BASE */
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9g45"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE		1
 
 /* board specific(not enough SRAM) */
 #define CONFIG_AT91SAM9G45_LCD_BASE	PHYS_SDRAM + 0xE00000
@@ -150,9 +133,6 @@
 				"2M(linux)ro,-(root) rw " \
 				"rootfstype=jffs2"
 
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
@@ -160,7 +140,6 @@
 #define CONFIG_SYS_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING		1
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool