X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpm9263.h;h=ffea8c667b6877177dc644223b4c50f273c94b1b;hb=43ade93bdb0c8bd57382be810a05b3793749ce85;hp=f6aebf4e4a7a4c1e17cc304663dd03a022cd2c76;hpb=28c4dae114c9b94b2a1111d81d4da716e9fc2cba;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index f6aebf4..ffea8c6 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -18,11 +18,7 @@
  */
 #include <asm/hardware.h>
 
-#define CONFIG_SYS_GENERIC_BOARD
-
 /* ARM asynchronous clock */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define MASTER_PLL_DIV		6
 #define MASTER_PLL_MUL		65
@@ -35,7 +31,6 @@
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_TEXT_BASE	0
 
-#define MACH_TYPE_PM9263	1475
 #define CONFIG_MACH_TYPE	MACH_TYPE_PM9263
 
 /* clocks */
@@ -155,7 +150,6 @@
 
 #undef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_USER_LOWLEVEL_INIT	1
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers
@@ -166,7 +160,6 @@
 #define	CONFIG_USART_ID			ATMEL_ID_SYS
 
 /* LCD */
-#define CONFIG_LCD			1
 #define LCD_BPP				LCD_COLOR8
 #define CONFIG_LCD_LOGO			1
 #undef LCD_TEST_PATTERN
@@ -175,7 +168,6 @@
 #define CONFIG_SYS_WHITE_ON_BLACK	1
 #define CONFIG_ATMEL_LCD		1
 #define CONFIG_ATMEL_LCD_BGR555		1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
 
 #define CONFIG_LCD_IN_PSRAM		1
 
@@ -184,7 +176,6 @@
 #define CONFIG_RED_LED		GPIO_PIN_PB(7) /* this is the power led */
 #define CONFIG_GREEN_LED	GPIO_PIN_PB(8) /* this is the user1 led */
 
-#define CONFIG_BOOTDELAY	3
 
 /*
  * BOOTP options
@@ -197,18 +188,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PING		1
-#define CONFIG_CMD_DHCP		1
 #define CONFIG_CMD_NAND		1
-#define CONFIG_CMD_USB		1
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS	1
@@ -273,12 +253,10 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW			1
-#define CONFIG_DOS_PARTITION			1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00a00000	/* AT91SAM9263_UHP_BASE */
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE			1
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
@@ -339,7 +317,6 @@
 
 #define CONFIG_BOOTCOMMAND		"run flashboot"
 #define CONFIG_ROOTPATH			"/ronetix/rootfs"
-#define CONFIG_AUTOBOOT_PROMPT		"autoboot in %d seconds\n", bootdelay
 
 #define CONFIG_CON_ROT			"fbcon=rotate:3 "
 #define CONFIG_BOOTARGS			"root=/dev/mtdblock4 rootfstype=jffs2 "\
@@ -378,7 +355,6 @@
 
 #define CONFIG_BAUDRATE			115200
 
-#define CONFIG_SYS_PROMPT		"u-boot-pm9263> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		\