X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpm9263.h;h=d93d23ccfc0ff3cd6713c77b2f24d8d32fed98be;hb=df6cf3d809fe543651e6bdf133baaa8b9841fe0f;hp=595acf1b9434a6b8b075dd449e99684a841a740b;hpb=6f9656d726235b4cbb4f469a82c30e5006a75b53;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 595acf1..d93d23c 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -5,7 +5,7 @@
  * Lead Tech Design <www.leadtechdesign.com>
  * Ilko Iliev <www.ronetix.at>
  *
- * Configuation settings for the RONETIX PM9263 board.
+ * Configuration settings for the RONETIX PM9263 board.
  */
 
 #ifndef __CONFIG_H
@@ -144,7 +144,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS 1
 #define CONFIG_INITRD_TAG	1
 
-#undef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_USER_LOWLEVEL_INIT	1
 
 /*
@@ -190,7 +189,6 @@
 
 #endif
 
-#define CONFIG_JFFS2_CMDLINE		1
 #define CONFIG_JFFS2_NAND		1
 #define CONFIG_JFFS2_DEV		"nand0" /* NAND device jffs2 lives on */
 #define CONFIG_JFFS2_PART_OFFSET	0	/* start of jffs2 partition */
@@ -205,12 +203,6 @@
 					 AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED	| \
 					 AT91_MATRIX_SCFG_SLOT_CYCLE(255))
 
-/* Ethernet */
-#define CONFIG_MACB			1
-#define CONFIG_RMII			1
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_RESET_PHY_R		1
-
 /* USB */
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
@@ -220,11 +212,6 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 
-#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END			0x23e00000
-
 #define CONFIG_SYS_USE_FLASH	1
 #undef CONFIG_SYS_USE_DATAFLASH
 #undef CONFIG_SYS_USE_NANDFLASH
@@ -232,9 +219,6 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
 #define CONFIG_BOOTCOMMAND	"sf probe 0; " \
 				"sf read 0x22000000 0x84000 0x294000; " \
 				"bootm 0x22000000"
@@ -242,18 +226,9 @@
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET		0x60000
-#define CONFIG_ENV_OFFSET_REDUND	0x80000
-#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 
 #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
-
-#define CONFIG_ENV_OFFSET	0x40000
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define	CONFIG_ENV_SIZE		0x10000
-#define CONFIG_ENV_OVERWRITE	1
-
 /* JFFS Partition offset set */
 #define CONFIG_SYS_JFFS2_FIRST_BANK	0
 #define CONFIG_SYS_JFFS2_NUM_BANKS	1
@@ -288,11 +263,6 @@
 #error "Undefined memory device"
 #endif
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
-
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
 				GENERATED_GBL_DATA_SIZE)