X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpm9263.h;h=7a6d817926c7450997ab6eefcf8627a56af7f211;hb=cd6a45a41fb2c19884ac87afade87b4d53601929;hp=80899930b29c8b040659821b98cc633e38ae73f0;hpb=776bf6a5457eb0c61c367d1ee7e45733a1c72ed6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 8089993..7a6d817 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -141,19 +141,6 @@
  */
 /* LCD */
 #define LCD_BPP				LCD_COLOR8
-#define CONFIG_LCD_LOGO			1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO			1
-#define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CONFIG_ATMEL_LCD		1
-#define CONFIG_ATMEL_LCD_BGR555		1
-
-#define CONFIG_LCD_IN_PSRAM		1
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE	1
 
 /* SDRAM */
 #define PHYS_SDRAM		0x20000000
@@ -163,7 +150,6 @@
 #define PHYS_FLASH_1			0x10000000
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_SECT	256
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -179,11 +165,6 @@
 
 #endif
 
-#define CONFIG_JFFS2_NAND		1
-#define CONFIG_JFFS2_DEV		"nand0" /* NAND device jffs2 lives on */
-#define CONFIG_JFFS2_PART_OFFSET	0	/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_SIZE		(256 * 1024 * 1024) /* partition size*/
-
 /* PSRAM */
 #define	PHYS_PSRAM			0x70000000
 #define	PHYS_PSRAM_SIZE			0x00400000	/* 4MB */
@@ -194,50 +175,13 @@
 					 AT91_MATRIX_SCFG_SLOT_CYCLE(255))
 
 /* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW			1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00a00000	/* AT91SAM9263_UHP_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-
-#define CONFIG_SYS_USE_FLASH	1
-#undef CONFIG_SYS_USE_DATAFLASH
-#undef CONFIG_SYS_USE_NANDFLASH
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
-				"sf read 0x22000000 0x84000 0x294000; " \
-				"bootm 0x22000000"
-
-#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
-
-#elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
-/* JFFS Partition offset set */
-#define CONFIG_SYS_JFFS2_FIRST_BANK	0
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
-
-/* 512k reserved for u-boot */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR	11
-
-#define CONFIG_BOOTCOMMAND		"run flashboot"
-#define CONFIG_ROOTPATH			"/ronetix/rootfs"
-
-#define CONFIG_CON_ROT			"fbcon=rotate:3 "
 
 #define CONFIG_EXTRA_ENV_SETTINGS				\
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"				\
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"			\
 	"partition=nand0,0\0"					\
 	"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"	\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "		\
-		CONFIG_CON_ROT					\
+		"fbcon=rotate:3 "				\
 		"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0"	\
 	"addip=setenv bootargs $(bootargs) "			\
 		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
@@ -249,12 +193,6 @@
 	"flashboot=run ramargs;run addip;bootm 0x10050000\0"	\
 	""
 
-#else
-#error "Undefined memory device"
-#endif
-
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
-				GENERATED_GBL_DATA_SIZE)
 
 #endif