X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpm9263.h;h=4856f61527610c9e8d733c621058d623879c07d7;hb=0f9595b9fa68ed1634adddf989fd037909eec433;hp=50d953a8e891a55f9c74a6b35c82f05de0543055;hpb=47b48fe186ad26740f97016d93e991f51447ddd6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 50d953a..4856f61 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -5,7 +5,7 @@
  * Lead Tech Design <www.leadtechdesign.com>
  * Ilko Iliev <www.ronetix.at>
  *
- * Configuation settings for the RONETIX PM9263 board.
+ * Configuration settings for the RONETIX PM9263 board.
  */
 
 #ifndef __CONFIG_H
@@ -25,10 +25,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 
-#define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9263"
-
-#define CONFIG_MACH_TYPE	MACH_TYPE_PM9263
-
 /* clocks */
 #define CONFIG_SYS_MOR_VAL						\
 		(AT91_PMC_MOR_MOSCEN |					\
@@ -140,13 +136,6 @@
 		 AT91_WDT_MR_WDDIS |				\
 		 AT91_WDT_MR_WDD(0xfff))
 
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	1
-
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_USER_LOWLEVEL_INIT	1
-
 /*
  * Hardware drivers
  */
@@ -174,7 +163,6 @@
 #define PHYS_FLASH_1			0x10000000
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_SECT	256
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -190,12 +178,6 @@
 
 #endif
 
-#define CONFIG_JFFS2_CMDLINE		1
-#define CONFIG_JFFS2_NAND		1
-#define CONFIG_JFFS2_DEV		"nand0" /* NAND device jffs2 lives on */
-#define CONFIG_JFFS2_PART_OFFSET	0	/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_SIZE		(256 * 1024 * 1024) /* partition size*/
-
 /* PSRAM */
 #define	PHYS_PSRAM			0x70000000
 #define	PHYS_PSRAM_SIZE			0x00400000	/* 4MB */
@@ -205,12 +187,6 @@
 					 AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED	| \
 					 AT91_MATRIX_SCFG_SLOT_CYCLE(255))
 
-/* Ethernet */
-#define CONFIG_MACB			1
-#define CONFIG_RMII			1
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_RESET_PHY_R		1
-
 /* USB */
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
@@ -220,11 +196,6 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 
-#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END			0x23e00000
-
 #define CONFIG_SYS_USE_FLASH	1
 #undef CONFIG_SYS_USE_DATAFLASH
 #undef CONFIG_SYS_USE_NANDFLASH
@@ -232,19 +203,12 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
-				"sf read 0x22000000 0x84000 0x294000; " \
-				"bootm 0x22000000"
 
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 
 #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
-
-#define CONFIG_ENV_OVERWRITE	1
-
 /* JFFS Partition offset set */
 #define CONFIG_SYS_JFFS2_FIRST_BANK	0
 #define CONFIG_SYS_JFFS2_NUM_BANKS	1
@@ -252,7 +216,6 @@
 /* 512k reserved for u-boot */
 #define CONFIG_SYS_JFFS2_FIRST_SECTOR	11
 
-#define CONFIG_BOOTCOMMAND		"run flashboot"
 #define CONFIG_ROOTPATH			"/ronetix/rootfs"
 
 #define CONFIG_CON_ROT			"fbcon=rotate:3 "
@@ -279,11 +242,6 @@
 #error "Undefined memory device"
 #endif
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
-
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
 				GENERATED_GBL_DATA_SIZE)