X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpm9261.h;h=f3196ee847be860051003d7003f50eaeedc5c8e2;hb=0f9595b9fa68ed1634adddf989fd037909eec433;hp=f100a40f212aa8e6621f6c1a691eaa0403d31f5e;hpb=2218b32d88f9b4b4484cea9a8b034ddab0be298b;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index f100a40..f3196ee 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2007-2008 * Stelian Pop @@ -5,8 +6,6 @@ * Ilko Iliev * * Configuation settings for the RONETIX PM9261 board. - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -26,13 +25,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 -#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" -#define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */ -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_TEXT_BASE 0 - -#define CONFIG_MACH_TYPE MACH_TYPE_PM9261 - /* clocks */ /* CKGR_MOR - enable main osc. */ #define CONFIG_SYS_MOR_VAL \ @@ -132,19 +124,9 @@ AT91_WDT_MR_WDDIS | \ AT91_WDT_MR_WDD(0xfff)) -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#undef CONFIG_SKIP_LOWLEVEL_INIT - /* * Hardware drivers */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS /* LCD */ #define LCD_BPP LCD_COLOR8 @@ -155,43 +137,16 @@ #define CONFIG_ATMEL_LCD 1 #define CONFIG_ATMEL_LCD_BGR555 1 -/* LED */ -#define CONFIG_AT91_LED -#define CONFIG_RED_LED GPIO_PIN_PC(12) -#define CONFIG_GREEN_LED GPIO_PIN_PC(13) -#define CONFIG_YELLOW_LED GPIO_PIN_PC(15) - - /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 - -/* - * Command line configuration. - */ -#define CONFIG_CMD_NAND 1 /* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ -/* DataFlash */ -#define CONFIG_ATMEL_DATAFLASH_SPI -#define CONFIG_HAS_DATAFLASH -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ -#define AT91_SPI_CLK 15000000 -#define DATAFLASH_TCSS (0x1a << 16) -#define DATAFLASH_TCHS (0x1 << 24) - /* NAND flash */ -#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 @@ -203,21 +158,9 @@ #define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(16) /* NOR flash */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 #define PHYS_FLASH_1 0x10000000 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -/* Ethernet */ -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x30000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 4) -#define CONFIG_DM9000_USE_16BIT 1 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 /* USB */ #define CONFIG_USB_ATMEL @@ -228,11 +171,6 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END 0x23e00000 - #undef CONFIG_SYS_USE_DATAFLASH_CS0 #undef CONFIG_SYS_USE_NANDFLASH #define CONFIG_SYS_USE_FLASH 1 @@ -240,39 +178,12 @@ #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_SYS_MONITOR_BASE \ - (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) " \ - "rw rootfstype=jffs2" #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro," \ - "256k(uboot)ro,128k(env1)ro," \ - "128k(env2)ro,2M(linux),-(root) " \ - "rw rootfstype=jffs2" #elif defined (CONFIG_SYS_USE_FLASH) - -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_OVERWRITE 1 - /* JFFS Partition offset set */ #define CONFIG_SYS_JFFS2_FIRST_BANK 0 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 @@ -280,23 +191,11 @@ /* 512k reserved for u-boot */ #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 -#define CONFIG_BOOTCOMMAND "run flashboot" - -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand" -#define MTDPARTS_DEFAULT \ - "mtdparts=physmap-flash.0:" \ - "256k(u-boot)ro," \ - "64k(u-boot-env)ro," \ - "1408k(kernel)," \ - "-(rootfs);" \ - "nand:-(nand)" - #define CONFIG_CON_ROT "fbcon=rotate:3 " -#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 " CONFIG_CON_ROT #define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ "partition=nand0,0\0" \ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -315,21 +214,8 @@ #error "Undefined memory device" #endif -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) - #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \ GENERATED_GBL_DATA_SIZE) #endif