X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpm9261.h;h=cf2ea3a0e599072e282971ad77f7eb939b1c63c2;hb=49c8ef0e45a91ec894ef15e7d043dafe8f1c5efd;hp=9dcb3b0c1b70ed7a7fb3ef65432213bbf425b8a3;hpb=8297e648b82197b7b543b0cc702983fcf98fe82c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 9dcb3b0..cf2ea3a 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -26,7 +26,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000
 
 #define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9261"
-#define CONFIG_ARCH_CPU_INIT
 
 #define CONFIG_MACH_TYPE	MACH_TYPE_PM9261
 
@@ -169,22 +168,11 @@
 #define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(16)
 
 /* NOR flash */
-#define CONFIG_SYS_FLASH_CFI			1
-#define CONFIG_FLASH_CFI_DRIVER			1
 #define PHYS_FLASH_1				0x10000000
 #define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_SECT		256
 #define CONFIG_SYS_MAX_FLASH_BANKS		1
 
-/* Ethernet */
-#define CONFIG_DRIVER_DM9000			1
-#define CONFIG_DM9000_BASE			0x30000000
-#define DM9000_IO				CONFIG_DM9000_BASE
-#define DM9000_DATA				(CONFIG_DM9000_BASE + 4)
-#define CONFIG_DM9000_USE_16BIT			1
-#define CONFIG_NET_RETRY_COUNT			20
-#define CONFIG_RESET_PHY_R			1
-
 /* USB */
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
@@ -194,11 +182,6 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 
-#define CONFIG_SYS_LOAD_ADDR			0x22000000
-
-#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END			0x23e00000
-
 #undef CONFIG_SYS_USE_DATAFLASH_CS0
 #undef CONFIG_SYS_USE_NANDFLASH
 #define CONFIG_SYS_USE_FLASH	1
@@ -206,10 +189,6 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
-#define CONFIG_ENV_SPI_MAX_HZ	15000000
 #define CONFIG_BOOTCOMMAND	"sf probe 0; " \
 				"sf read 0x22000000 0x84000 0x210000; " \
 				"bootm 0x22000000"
@@ -217,18 +196,9 @@
 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET		0x60000
-#define CONFIG_ENV_OFFSET_REDUND	0x80000
-#define CONFIG_ENV_SIZE			0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
 
 #elif defined (CONFIG_SYS_USE_FLASH)
-
-#define CONFIG_ENV_OFFSET	0x40000
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define	CONFIG_ENV_SIZE		0x10000
-#define CONFIG_ENV_OVERWRITE	1
-
 /* JFFS Partition offset set */
 #define CONFIG_SYS_JFFS2_FIRST_BANK	0
 #define CONFIG_SYS_JFFS2_NUM_BANKS	1