X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpm9261.h;h=87f216be672e67dd67fc075d1bf563e2b54a2453;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=38668deffff0ed194afa2283a1aa47d4a28675b8;hpb=470135be276b2d92c6da464c68839202d4ff0d08;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 38668de..87f216b 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2007-2008 * Stelian Pop @@ -5,8 +6,6 @@ * Ilko Iliev * * Configuation settings for the RONETIX PM9261 board. - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -26,13 +25,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 -#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" -#define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */ -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_TEXT_BASE 0 - -#define CONFIG_MACH_TYPE MACH_TYPE_PM9261 - /* clocks */ /* CKGR_MOR - enable main osc. */ #define CONFIG_SYS_MOR_VAL \ @@ -132,40 +124,18 @@ AT91_WDT_MR_WDDIS | \ AT91_WDT_MR_WDD(0xfff)) -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#undef CONFIG_SKIP_LOWLEVEL_INIT - /* * Hardware drivers */ /* LCD */ #define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO 1 -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO 1 -#define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_BGR555 1 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 /* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ /* NAND flash */ -#define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 @@ -177,21 +147,9 @@ #define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(16) /* NOR flash */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 #define PHYS_FLASH_1 0x10000000 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -/* Ethernet */ -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x30000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 4) -#define CONFIG_DM9000_USE_16BIT 1 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 /* USB */ #define CONFIG_USB_ATMEL @@ -202,11 +160,6 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END 0x23e00000 - #undef CONFIG_SYS_USE_DATAFLASH_CS0 #undef CONFIG_SYS_USE_NANDFLASH #define CONFIG_SYS_USE_FLASH 1 @@ -214,29 +167,12 @@ #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_ENV_SECT_SIZE 0x210 -#define CONFIG_ENV_SPI_MAX_HZ 15000000 -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x210000; " \ - "bootm 0x22000000" #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" #elif defined (CONFIG_SYS_USE_FLASH) - -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_OVERWRITE 1 - /* JFFS Partition offset set */ #define CONFIG_SYS_JFFS2_FIRST_BANK 0 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 @@ -244,22 +180,11 @@ /* 512k reserved for u-boot */ #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 -#define CONFIG_BOOTCOMMAND "run flashboot" - -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand" -#define MTDPARTS_DEFAULT \ - "mtdparts=physmap-flash.0:" \ - "256k(u-boot)ro," \ - "64k(u-boot-env)ro," \ - "1408k(kernel)," \ - "-(rootfs);" \ - "nand:-(nand)" - #define CONFIG_CON_ROT "fbcon=rotate:3 " #define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ "partition=nand0,0\0" \ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -278,19 +203,6 @@ #error "Undefined memory device" #endif -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) - #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \ GENERATED_GBL_DATA_SIZE)