X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fplatinum.h;h=a780cca592662cc6dc15239ec6c02a35496f0eaa;hb=9c5b00973bceb7c0192bd6b03672d69b092700b4;hp=91ffc7c068b5d3f237c965a13396df4a39cee40c;hpb=b939689c7b87773c44275a578ffc8674a867e39d;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/platinum.h b/include/configs/platinum.h index 91ffc7c..a780cca 100644 --- a/include/configs/platinum.h +++ b/include/configs/platinum.h @@ -1,91 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2014, Barco (www.barco.com) - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __PLATINUM_CONFIG_H__ #define __PLATINUM_CONFIG_H__ -#define CONFIG_SYS_GENERIC_BOARD - /* SPL */ -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT /* Location in NAND to read U-Boot from */ #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024) #include "imx6_spl.h" /* common IMX6 SPL configuration */ #include "mx6_common.h" -#include -#include - -/* - * Console configuration - */ - -#include -#define CONFIG_CMD_BMODE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FUSE -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_I2C -#undef CONFIG_CMD_IMLS -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_TIME -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_CMD_USB /* * Hardware configuration */ -/* GPIO config */ -#define CONFIG_MXC_GPIO - /* UART config */ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_CONS_INDEX 1 /* I2C config */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 /* MMC config */ -#define CONFIG_FSL_ESDHC -#define CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 1 -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_BOUNCE_BUFFER -#define CONFIG_DOS_PARTITION /* Ethernet config */ #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_PHYLIB - /* USB config */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_MX6 -#define CONFIG_USB_STORAGE #define CONFIG_MXC_USB_PORT 1 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 @@ -108,13 +62,9 @@ #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH - #ifdef CONFIG_CMD_NAND /* NAND config */ -#define CONFIG_NAND_MXS #ifndef CONFIG_SYS_NAND_MAX_CHIPS #define CONFIG_SYS_NAND_MAX_CHIPS 2 #endif @@ -124,15 +74,8 @@ #define CONFIG_SYS_NAND_ONFI_DETECTION /* DMA config, needed for GPMI/MXS NAND support */ -#define CONFIG_APBH_DMA -#define CONFIG_APBH_DMA_BURST -#define CONFIG_APBH_DMA_BURST8 - -/* Fuse support */ -#define CONFIG_MXC_OCOTP /* Environment in NAND */ -#define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET (16 << 20) #define CONFIG_ENV_SECT_SIZE (128 << 10) #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE @@ -143,7 +86,6 @@ /* Environment in MMC */ #define CONFIG_ENV_SIZE (8 << 10) -#define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET (6 * 64 * 1024) #define CONFIG_SYS_MMC_ENV_DEV 0 @@ -153,75 +95,19 @@ * U-Boot configuration */ -/* Console boot messages */ -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -/* Tag config */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG - /* Board startup config */ -#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Device tree support */ -#define CONFIG_OF_LIBFDT - -#define CONFIG_LOADADDR 0x12000000 -#define CONFIG_SYS_TEXT_BASE 0x17800000 - #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ PHYS_SDRAM_SIZE - (12 << 20)) -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "run bootubi_scr" /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER - -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_PREBOOT -#define CONFIG_SYS_CBSIZE 256 - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - /* MTD/UBI/UBIFS config */ -#define CONFIG_LZO -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_RBTREE - -#if (CONFIG_SYS_NAND_MAX_CHIPS == 1) -#define MTDIDS_DEFAULT "nand0=gpmi-nand" -#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \ - "512k(env1),512k(env2),-(ubi)" -#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2) -#define MTDIDS_DEFAULT "nand0=gpmi-nand" -#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \ - "512k(env1),512k(env2),495M(ubi0)," \ - "14M(res0),2M(res1)," \ - "512k(res2),512k(res3),-(ubi1)" -#endif - -#ifndef CONFIG_SYS_DCACHE_OFF -#define CONFIG_CMD_CACHE -#endif /* * Environment configuration @@ -250,8 +136,8 @@ "baudrate=115200\0" \ "boot_scr=boot.uboot\0" \ "boot_vol=0\0" \ - "mtdids="MTDIDS_DEFAULT"\0" \ - "mtdparts="MTDPARTS_DEFAULT"\0" \ + "mtdids="CONFIG_MTDIDS_DEFAULT"\0" \ + "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \ "mmcfs=ext2\0" \ "mmcrootpart=1\0" \ \