X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fplatinum.h;h=2610e243e723500e0e82fb1a7e0fcee8756122a1;hb=43ade93bdb0c8bd57382be810a05b3793749ce85;hp=de885abb234ea0132456d7d4b268419ba4fae71c;hpb=3b1f681131149b5f62602f582a7e60b0185a2a49;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/platinum.h b/include/configs/platinum.h
index de885ab..2610e24 100644
--- a/include/configs/platinum.h
+++ b/include/configs/platinum.h
@@ -8,8 +8,6 @@
 #define __PLATINUM_CONFIG_H__
 
 /* SPL */
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 
 /* Location in NAND to read U-Boot from */
 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
@@ -22,52 +20,30 @@
  */
 
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FUSE
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_TIME
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_USB
 
 /*
  * Hardware configuration
  */
 
-/* GPIO config */
-#define CONFIG_MXC_GPIO
-
 /* UART config */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE			UART1_BASE
-#define CONFIG_BAUDRATE				115200
-#define CONFIG_CONS_INDEX			1
 
 /* I2C config */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED			100000
 
 /* MMC config */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR		0
 #define CONFIG_SYS_FSL_USDHC_NUM		1
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_DOS_PARTITION
 
 /* Ethernet config */
 #define CONFIG_FEC_MXC
@@ -79,7 +55,6 @@
 /* USB config */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_MXC_USB_PORT			1
 #define CONFIG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS			0
@@ -119,9 +94,6 @@
 #define CONFIG_APBH_DMA_BURST
 #define CONFIG_APBH_DMA_BURST8
 
-/* Fuse support */
-#define CONFIG_MXC_OCOTP
-
 /* Environment in NAND */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		(16 << 20)
@@ -144,49 +116,21 @@
  * U-Boot configuration
  */
 
-/* Tag config */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
 /* Board startup config */
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Device tree support */
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_LOADADDR				0x12000000
-#define CONFIG_SYS_TEXT_BASE			0x17800000
-
 #define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + \
 						 PHYS_SDRAM_SIZE - (12 << 20))
 
-#define CONFIG_BOOTDELAY			3
 #define CONFIG_BOOTCOMMAND			"run bootubi_scr"
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_PREBOOT
 
-#define CONFIG_SYS_CBSIZE			256
-
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
 						 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS			16
-#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR			CONFIG_LOADADDR
 
 /* MTD/UBI/UBIFS config */
 #define CONFIG_LZO
@@ -206,10 +150,6 @@
 				"512k(res2),512k(res3),-(ubi1)"
 #endif
 
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 /*
  * Environment configuration
  */