X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpicosam9g45.h;h=77b7ce411f5b47e26a131291dd0fa929c84ffeb6;hb=f9a48654ee70fbad29f487d074fd36a1548b4209;hp=3998edaeb0d0a5ed9be4fe4ea738c03bd933ef77;hpb=390194d43fa4478ddb638164ddb114c979f3e57a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h
index 3998eda..77b7ce4 100644
--- a/include/configs/picosam9g45.h
+++ b/include/configs/picosam9g45.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the mini-box PICOSAM9G45 board.
  * (C) Copyright 2015 Inter Act B.V.
@@ -7,8 +8,6 @@
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,16 +15,12 @@
 
 #include <asm/hardware.h>
 
-#define CONFIG_SYS_TEXT_BASE		0x23f00000
-
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_PICOSAM
-
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -33,11 +28,9 @@
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
 #define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
 
 /* serial console */
-#define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define	CONFIG_USART_ID			ATMEL_ID_SYS
 
@@ -61,20 +54,8 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Enable the watchdog */
-#define CONFIG_AT91SAM9_WATCHDOG
-#define CONFIG_HW_WATCHDOG
-
-/*
- * Command line configuration.
- */
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS	2
 #define PHYS_SDRAM_1		ATMEL_BASE_CS1	/* on DDRSDRC1 */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* 128 MB */
 #define PHYS_SDRAM_2		ATMEL_BASE_CS6	/* on DDRSDRC0 */
@@ -99,34 +80,20 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
 
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		0x23e00000
-
 #ifdef CONFIG_SYS_USE_MMC
 /* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_SIZE		0x4000
 
 #define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 dtb; " \
 				"fatload mmc 0:1 0x22000000 zImage; " \
 				"bootz 0x22000000 - 0x21000000"
 #endif
 
-#define CONFIG_SYS_CBSIZE	256
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE  \
-					+ sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE		0x300000
 #define CONFIG_SPL_MAX_SIZE		0x010000
 #define CONFIG_SPL_STACK		0x310000
 
@@ -139,7 +106,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000
 
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
 
 #define CONFIG_SPL_ATMEL_SIZE