X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpicosam9g45.h;h=0b240e7ebc32a229598f8106b1ad5e8cc47dbb91;hb=0223462b373b975d970fa86e5e1a7eadd1d41820;hp=998a7a344b2b9e7a05fd8afc8f49fc80708fafd9;hpb=5c84ad097d829bb1e6460438f33e1536b23b3c9b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h
index 998a7a3..0b240e7 100644
--- a/include/configs/picosam9g45.h
+++ b/include/configs/picosam9g45.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the mini-box PICOSAM9G45 board.
  * (C) Copyright 2015 Inter Act B.V.
@@ -7,8 +8,6 @@
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,16 +15,12 @@
 
 #include <asm/hardware.h>
 
-#define CONFIG_SYS_TEXT_BASE		0x23f00000
-
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_PICOSAM
-
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -61,9 +56,6 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /* Enable the watchdog */
 #define CONFIG_AT91SAM9_WATCHDOG
@@ -74,7 +66,6 @@
  */
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS	2
 #define PHYS_SDRAM_1		ATMEL_BASE_CS1	/* on DDRSDRC1 */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* 128 MB */
 #define PHYS_SDRAM_2		ATMEL_BASE_CS6	/* on DDRSDRC0 */
@@ -97,9 +88,6 @@
 #define CONFIG_RESET_PHY_R
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-
 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
 
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
@@ -107,40 +95,19 @@
 
 #ifdef CONFIG_SYS_USE_MMC
 /* bootstrap + u-boot + env + linux in mmc */
-#define FAT_ENV_INTERFACE	"mmc"
-/*
- * We don't specify the part number, if device 0 has partition table, it means
- * the first partition; it no partition table, then take whole device as a
- * FAT file system.
- */
-#define FAT_ENV_DEVICE_AND_PART	"0"
-#define FAT_ENV_FILE		"uboot.env"
-#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
 #define CONFIG_ENV_SIZE		0x4000
 
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
-				"root=/dev/mmcblk0p2 rw rootwait"
 #define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 dtb; " \
 				"fatload mmc 0:1 0x22000000 zImage; " \
 				"bootz 0x22000000 - 0x21000000"
 #endif
 
-#define CONFIG_SYS_CBSIZE	256
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE  \
-					+ sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x300000
 #define CONFIG_SPL_MAX_SIZE		0x010000
 #define CONFIG_SPL_STACK		0x310000
@@ -154,7 +121,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000
 
-#define CONFIG_SPL_LDSCRIPT	arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"