X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpico-imx8mq.h;h=2293a2919e28a89c6c13c70cb2f57a13668e8edd;hb=be7dbb60c5bfa38ea444fe7de1dca8bd35f83f5b;hp=d858a7edf8df7c38d294fea43100881cbcbdc239;hpb=8bef03683623d6a7adfff1f859ed44fad9e92ed7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index d858a7e..2293a29 100644
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -11,21 +11,10 @@
 
 #define CONFIG_SPL_MAX_SIZE		(124 * 1024)
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_WATCHDOG
-#define CONFIG_SPL_DRIVERS_MISC
-#define CONFIG_SPL_POWER
-#define CONFIG_SPL_I2C
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK		0x187FF0
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO
-#define CONFIG_SPL_MMC
 #define CONFIG_SPL_BSS_START_ADDR	0x00180000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x2000	/* 8 KB */
 #define CONFIG_SYS_SPL_MALLOC_START	0x42200000
@@ -45,19 +34,13 @@
 /* ENET Config */
 /* ENET1 */
 #if defined(CONFIG_CMD_NET)
-#define CONFIG_MII
 #define CONFIG_ETHPRIME			"FEC"
 
-#define CONFIG_FEC_MXC
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_FEC_MXC_PHYADDR		1
 #define FEC_QUIRK_ENET_MAC
 
-#define CONFIG_PHY_GIGE
 #define IMX_FEC_BASE			0x30BE0000
-
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ATHEROS
 #endif
 
 /* Initial environment variables */
@@ -71,7 +54,7 @@
 	"initrd_addr=0x43800000\0"					\
 	"initrd_high=0xffffffffffffffff\0"				\
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0"		\
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0"	\
+	"mmcpart=1\0"	\
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0"			\
 	"mmcautodetect=yes\0"						\
 	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 "	\
@@ -97,18 +80,6 @@
 		"${get_cmd} ${loadaddr} ${image}; "			\
 		"booti; "
 
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev}; if mmc rescan; then "			\
-		"if run loadbootscript; then "				\
-			"run bootscript; "				\
-		"else "							\
-			"if run loadimage; then "			\
-				"run mmcboot; "				\
-			"else run netboot; "				\
-			"fi; "						\
-		"fi; "							\
-	"else booti ${loadaddr} - ${fdt_addr}; fi"
-
 /* Link Definitions */
 
 #define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
@@ -124,10 +95,6 @@
 #define PHYS_SDRAM			0x40000000
 #define PHYS_SDRAM_SIZE			0x80000000	/* 2 GiB DDR */
 
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
-					(PHYS_SDRAM_SIZE >> 1))
-
 #define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
 
 /* Monitor Command Prompt */
@@ -137,17 +104,9 @@
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CONFIG_IMX_BOOTAUX
-
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
-#define CONFIG_MXC_GPIO
-
-#define CONFIG_OF_SYSTEM_SETUP
-
 #define CONFIG_SYS_BOOTM_LEN		SZ_128M
 
 #endif