X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fphycore_imx8mp.h;h=d79d364c8e2f94d98659249825d13eb8c1236106;hb=4db386655a889b6466d2c3f40839ad21205c6d21;hp=d0338fad051c51a91a76a0341612dd28bbc77e4e;hpb=72d81360aabd0485d3832d292bbea29c7c4554ef;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h
index d0338fa..d79d364 100644
--- a/include/configs/phycore_imx8mp.h
+++ b/include/configs/phycore_imx8mp.h
@@ -10,39 +10,17 @@
 #include <linux/sizes.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_BOOTM_LEN		SZ_64M
-
-#define CONFIG_SPL_MAX_SIZE		(152 * SZ_1K)
-#define CONFIG_SYS_MONITOR_LEN		SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
-#define CONFIG_SYS_UBOOT_BASE \
+#define CFG_SYS_UBOOT_BASE \
 		(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
-#define CONFIG_SPL_STACK		0x960000
-#define CONFIG_SPL_BSS_START_ADDR	0x98FC00
-#define CONFIG_SPL_BSS_MAX_SIZE		SZ_1K
-#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K
-
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PCA9450
-
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
 	"image=Image\0" \
 	"console=ttymxc0,115200\0" \
 	"fdt_addr=0x48000000\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcpart=1\0" \
 	"mmcroot=2\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console} " \
@@ -73,45 +51,15 @@
 			"echo WARN: Cannot load the DT; " \
 		"fi;\0" \
 
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run loadimage; then " \
-			"run mmcboot; " \
-		"else run netboot; " \
-		"fi; " \
-	"fi;"
-
 /* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR			0x40480000
 
-#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE	SZ_512K
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_INIT_RAM_ADDR	0x40000000
+#define CFG_SYS_INIT_RAM_SIZE	SZ_512K
 
-#define CONFIG_MMCROOT			"/dev/mmcblk2p2"  /* USDHC3 */
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		SZ_32M
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CFG_SYS_SDRAM_BASE		0x40000000
 
 #define PHYS_SDRAM			0x40000000
 #define PHYS_SDRAM_SIZE			0x80000000
 
-/* UART */
-#define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		SZ_2K
-#define CONFIG_SYS_MAXARGS		64
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-/* USDHC */
-#define CONFIG_FSL_USDHC
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SYS_FSL_ESDHC_ADDR       0
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
 #endif /* __PHYCORE_IMX8MP_H */