X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpfla02.h;h=4162a71ca6610d521306cb082fa5e8f67028172f;hb=d789a8259e3b3b77e3eb2b090373ab2cbc225629;hp=86d875dccf86c4a1de7c826a2facb447b4aecea4;hpb=4bafceff0e9e5a36908031e41c69a6b37e82da58;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pfla02.h b/include/configs/pfla02.h
index 86d875d..4162a71 100644
--- a/include/configs/pfla02.h
+++ b/include/configs/pfla02.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) Stefano Babic <sbabic@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 
@@ -9,8 +8,6 @@
 #define __PCM058_CONFIG_H
 
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
 #include "imx6_spl.h"
 #endif
 
@@ -25,24 +22,18 @@
 #define CONSOLE_DEV		"ttymxc3"
 
 /* Early setup */
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(8 * SZ_1M)
 
 /* Ethernet */
-#define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		3
 
 /* SPI Flash */
-#define CONFIG_SF_DEFAULT_BUS		2
-#define CONFIG_SF_DEFAULT_CS		0
-#define CONFIG_SF_DEFAULT_SPEED		20000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 
 /* I2C Configs */
 #define CONFIG_SYS_I2C
@@ -50,26 +41,19 @@
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 0 */
 #define CONFIG_SYS_I2C_SPEED		  100000
 
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_CMD_NAND
 /* Enable NAND support */
-#define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#endif
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
 
 /* Filesystem support */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
 
 /* Various command support */
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -86,23 +70,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 
 /* Environment organization */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SIZE                (16 * 1024)
-#define CONFIG_ENV_OFFSET		(1024 * SZ_1K)
-#define CONFIG_ENV_SECT_SIZE		(64 * SZ_1K)
-#define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
-						CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
-
-#ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              (0x1E0000)
-#define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
-#endif
 
 /* Default environment */
 #define CONFIG_EXTRA_ENV_SETTINGS \