X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpf5200.h;h=c065d3328c97be28156e6d2e38ef6e9114a03cde;hb=776488eb88d0915945eeecfc1ad3e318979f9548;hp=7151a9ec2e2915641301840bbebee9d662c9a690;hpb=f61137937da9afb543a55ca44b7178f2feee34cf;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 7151a9e..c065d33 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -49,11 +49,7 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
 /*
  * Serial console configuration
  */
@@ -74,6 +70,7 @@
 #define CONFIG_PCI		1
 #define CONFIG_PCI_PNP		1
 #define CONFIG_PCI_SCAN_SHOW	1
+#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
 
 #define CONFIG_PCI_MEM_BUS	0x40000000
 #define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
@@ -90,13 +87,6 @@
 #define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 #define CONFIG_NS8382X		1
 #endif
-
-#define ADD_PCI_CMD		CFG_CMD_PCI
-
-#else				/* MPC5100 */
-
-#define ADD_PCI_CMD		0	/* no CFG_CMD_PCI */
-
 #endif
 
 /* Partitions */
@@ -106,26 +96,35 @@
 /* USB */
 #if 0
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD		0
 #endif
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
-				 CFG_CMD_EEPROM	| \
-				 CFG_CMD_FAT	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_IDE	| \
-				 CFG_CMD_BSP	| \
-				 CFG_CMD_ELF	| \
-				 ADD_PCI_CMD	  )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+
+#ifdef CONFIG_MPC5200
+#define CONFIG_CMD_PCI
+#endif
+
 
 #if (TEXT_BASE == 0xFF000000)	/* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT		1
@@ -263,7 +262,7 @@
  */
 #define CFG_LONGHELP		/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -281,6 +280,11 @@
 
 #define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */