X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpdnb3.h;h=19b80d18e2d30d4ce68043179cfefe9720aed612;hb=26750c8aee2383a026e0cf89e9310628d3a5a6a0;hp=f8aac1aba3ddd453984864444961777cba6667a8;hpb=833d94bcdc89cf88928be21587240950afdc33c8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index f8aac1a..19b80d1 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -33,6 +33,8 @@
 #define CONFIG_IXP425		1       /* This is an IXP425 CPU	*/
 #define CONFIG_PDNB3		1       /* on an PDNB3 board		*/
 
+#define	CONFIG_MACH_TYPE	1002
+
 #define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
 #define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/
 
@@ -40,7 +42,6 @@
  * Ethernet
  */
 #define CONFIG_IXP4XX_NPE	1	/* include IXP4xx NPE support	*/
-#define CONFIG_NET_MULTI	1
 #define	CONFIG_PHY_ADDR		16	/* NPE0 PHY address		*/
 #define CONFIG_HAS_ETH1
 #define CONFIG_PHY1_ADDR	18	/* NPE1 PHY address		*/
@@ -50,8 +51,6 @@
 /*
  * Misc configuration options
  */
-#define CONFIG_USE_IRQ          1	/* we need IRQ stuff for timer	*/
-
 #define CONFIG_BOOTCOUNT_LIMIT		/* support for bootcount limit	*/
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0x60003000 /* inside qmrg sram		*/
 
@@ -63,11 +62,11 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(1 << 20)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
+#define CONFIG_IXP_SERIAL
 #define CONFIG_BAUDRATE         115200
 #define CONFIG_SYS_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
 
@@ -116,10 +115,8 @@
 #define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
 #define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
 
-#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+#define CONFIG_IXP425_TIMER_CLK		66666666
 #define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Stack sizes
@@ -188,6 +185,7 @@
 #define PHYS_SDRAM_1            0x00000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE       0x02000000 /* 32 MB */
 
+#define CONFIG_SYS_TEXT_BASE	       0x50000000
 #define CONFIG_SYS_FLASH_BASE          0x50000000
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
 #if defined(CONFIG_SCPU)
@@ -264,7 +262,7 @@
  * NAND-FLASH stuff
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x51000000	/* NAND FLASH Base Address	*/
+#define CONFIG_SYS_NAND_BASE		0x51000000	/* NAND FLASH Base Address */
 #endif
 
 /*
@@ -345,4 +343,9 @@
  */
 #define CONFIG_SYS_CACHELINE_SIZE	32
 
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_INIT_SP_ADDR        \
+	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
 #endif  /* __CONFIG_H */