X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fpdm360ng.h;h=d31c13796735304756be974703316fbe1863ce70;hb=3765b3e7bd0f8e46914d417f29cbcb0c72b1acf7;hp=f0154e091e5883d8ed462f1622b03b70ffa49220;hpb=31a4f1e5b6ee9b6335f0313dce7637cef887f84f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index f0154e0..d31c137 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2009-2010
  * Michael Weiß, ifm ecomatic gmbh, michael.weiss@ifm.com
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -68,7 +52,6 @@
 
 #define CONFIG_SYS_MPC512X_CLKIN	33333333	/* in Hz */
 
-#define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f() */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_IMMR			0x80000000
@@ -206,6 +189,9 @@
 #define CONFIG_SYS_SRAM_BASE		0x50000000
 #define CONFIG_SYS_SRAM_SIZE		0x00020000	/* 128 KB */
 
+#define CONFIG_SYS_CS1_START		CONFIG_SYS_FLASH1_BASE
+#define CONFIG_SYS_CS1_SIZE		CONFIG_SYS_FLASH_SIZE
+
 /* ALE active low, data size 4 bytes */
 #define CONFIG_SYS_CS0_CFG		0x05059350
 /* ALE active low, data size 4 bytes */
@@ -213,6 +199,9 @@
 
 #define CONFIG_SYS_MRAM_BASE		0x50040000
 #define CONFIG_SYS_MRAM_SIZE		0x00020000
+#define CONFIG_SYS_CS2_START		CONFIG_SYS_MRAM_BASE
+#define CONFIG_SYS_CS2_SIZE		CONFIG_SYS_MRAM_SIZE
+
 /* ALE active low, data size 4 bytes */
 #define CONFIG_SYS_CS2_CFG		0x05059110
 
@@ -225,9 +214,7 @@
 #define CONFIG_CMD_NAND			/* enable NAND support */
 #define CONFIG_NAND_MPC5121_NFC
 #define CONFIG_SYS_NAND_BASE            0x40000000
-
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
-#define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 #define CONFIG_SYS_NAND_SELECT_DEVICE	/* driver supports mutipl. chips */
 
 /*
@@ -298,9 +285,25 @@
 #define CONSOLE_FIFO_RX_ADDR	FIFOC_PSC6_RX_ADDR
 
 /*
+ * Clocks in use
+ */
+#define SCCR1_CLOCKS_EN	(CLOCK_SCCR1_CFG_EN |				\
+			 CLOCK_SCCR1_LPC_EN |				\
+			 CLOCK_SCCR1_NFC_EN |				\
+			 CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) |	\
+			 CLOCK_SCCR1_PSCFIFO_EN |			\
+			 CLOCK_SCCR1_DDR_EN |				\
+			 CLOCK_SCCR1_FEC_EN |				\
+			 CLOCK_SCCR1_TPR_EN)
+
+#define SCCR2_CLOCKS_EN	(CLOCK_SCCR2_MEM_EN |		\
+			 CLOCK_SCCR2_SPDIF_EN |		\
+			 CLOCK_SCCR2_DIU_EN |		\
+			 CLOCK_SCCR2_I2C_EN)
+
+/*
  * Used PSC UART devices
  */
-#define CONFIG_SERIAL_MULTI
 #define CONFIG_SYS_PSC1
 #define CONFIG_SYS_PSC4
 #define CONFIG_SYS_PSC6
@@ -322,6 +325,11 @@
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
+ * IIM - IC Identification Module
+ */
+#undef CONFIG_FSL_IIM
+
+/*
  * EEPROM configuration
  */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2	/* 16-bit EEPROM addr */
@@ -383,6 +391,8 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
+#undef CONFIG_CMD_FUSE
+
 #ifdef CONFIG_VIDEO
 #define CONFIG_CMD_BMP
 #endif
@@ -436,10 +446,8 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-#ifdef CONFIG_SERIAL_MULTI
 /* POST support */
 #define CONFIG_POST             (CONFIG_SYS_POST_COPROC)
-#endif
 
 /*
  * Environment Configuration